3d scanning and printing Melbourne
                     Stereolithography (SLA) Printing
It can be used for the creation of prototypes for new product development, medical 
sector and has many more applications with a relatively lower price.
Materials| Upload CAD File|Vacuum Casting
SLA 3D Printing
Stereolithography technique is an additive 
manufacturing process that is used for creation of 
parts layer by layer through the use of 
photochemical processes. In this process, chemical 
monomers and oligomers are cross linked to form 
polymers. An ultraviolet laser is focused on a vat of 
photopolymer resin with the help of a CAD 
software. The resin is solidified photochemically 
and a single layer of the desired part is formed. 
After that, one layer is lowered by the build platform 
and the tank is coated with the resin again. This 
process is repeated again and again until the part 
is completed. After the completion, the part is 
washed with the solvent in order to remove the 
resin off the surface. It is a very widely used 
3D printing technology.
Uses :
Major Benefits : It can be used for the creation of prototypes for 
new product development, medical sector and 
has many more applications with a relatively 
lower price.
> Lower cost
Medical Sector
SLA can be used in the creation of 3D model 
> Lesser print time of the various regions of the patient’s body 
through the use of CT and MRI scans and 
> Large built size subsequently it can help in the planning and 
designing and manufacturing of the implant.
> Widely available Prototype Creation
This technique is widely used for the creation 
of prototypes in a relatively low price and high 
> Smooth finish accuracy. It can be used for the creation of 
complex shapes.
SLA Printing Methods
Thank You
Perth                                                      
197 St Georges Terrace, Perth, WA 6000
For visit make an appointment
+61 1300 143 540
+61-0406163997
[email protected]