Carbide button, Tungsten carbide button, - itungstencarbide.com
                     Welcome to Zhuzhou Better 
Tungsten Carbide Co., LTD
How do you remove tungsten 
carbide buttons?
Carbide buttons work at high machine 
temperatures generated through massive 
speeds that reduce the time machinery has 
been used. It has a refined finish with 
excellent size and style for better quality. The 
replacement of the button requires items like 
a torch, heating methods of about 1500F.
 
Remove old buttons
You heat the old carbide tooth with light and 
afterward, you flick or push the old tooth off. 
The old carbide tooth will ordinarily not 
tumble off all alone. 
Prepare new buttons before you mount
When you are supplanting carbide teeth, you should simply put the new tooth, braze 
compound side down, in a similar spot the old tooth was. The new braze composite will 
blend in with the old braze amalgam fine and dandy. 
 
If you are putting stump processor teeth on your stump processor unexpectedly then 
you need to ensure that your steel is liberated from scale or rust just as liberated from 
oils or oils. Simply cleaning the steel off could conceivably work. Utilizing a solid scathing 
more clean
 
The carbide button steel will extend around a few fold the 
amount of as the carbide so warming through the carbide 
levels this out. On the off chance that you get the steel above 
1500° F, the steel will get fragile so you truly need to warm 
through the carbide. 
 
As you heat, three things will occur: 
 1. The water will bubble out of the brazing transition 
 2. Somewhat later the brazing transition will go to fluid and 
spread out
 3. At last the braze compound will dissolve 
 This is the reason you need the pokey stick or document
Contact us 
Business name - Zhuzhou Better Tungsten 
Carbide Co., LTD
Email - [email protected]
Phone: +86 13647338188
Website- 
https://www.itungstencarbide.com/