Tungsten carbide button, Carbide button itungstencarbide.com
                      
Welcome to Zhuzhou Better Tungsten Carbide Co., 
LTD 
 
How do you remove tungsten carbide buttons? 
Carbide buttons work at high machine temperatures generated through 
massive speeds that reduce the time machinery has been used. It has a refined 
finish with excellent size and style for better quality. The replacement of the 
button requires items like a torch, heating methods of about 1500F. 
 
Remove old buttons 
You heat the old carbide tooth with light and afterward, you flick or push the 
old tooth off. The old carbide tooth will ordinarily not tumble off all alone. 
People, to retip sawblades, utilize sort of a sharp, flicking movement to 
thump the old tooth off. There is a video on eliminating the old carbide tip 
underneath.  
 
 
 
 
Prepare new buttons before you mount 
When you are supplanting carbide teeth, you should simply put the new 
tooth, braze compound side down, in a similar spot the old tooth was. The 
new braze composite will blend in with the old braze amalgam fine and 
dandy.  
 
If you are putting stump processor teeth on your stump processor 
unexpectedly then you need to ensure that your steel is liberated from scale or 
rust just as liberated from oils or oils. Simply cleaning the steel off could 
conceivably work. Utilizing a solid scathing more clean 
 
Begin the process of heating 
The carbide button steel will extend around a few fold the amount of as the 
carbide so warming through the carbide levels this out. On the off chance that 
you get the steel above 1500° F, the steel will get fragile so you truly need to 
warm through the carbide.  
 
 
 
 
This is the reason you need the pokey stick or document 
 
Use Sticks 
When the water bubbles out, the transition turns fluid and when the brazing 
compound turns fluid. The carbide tip or stump processor tooth can buoy and 
move a bit. Utilize the pokey stick to delicately prod the part back where you 
need it. Try not to push down on the part with the pokey stick or you'll 
extract the braze from the joint.  
 
Use of Braze Joints 
A slight layer of brazing compound in the joint will give you more prominent 
elasticity. A thick layer of brazing compound in the braze joint will give you 
more effective insurance and padding from stun.  
 
Contact us: 
Business name - Zhuzhou Better Tungsten Carbide Co., LTD 
Email - [email protected]  
Phone: +86 13647338188 
Website- https://www.itungstencarbide.com/