Change Your Car Brake Pads Following Easy Steps
                     Change Your Car Brake Pads Following Easy Steps
James Bolte
Writer at Bestinfo-log.com, made many 
article contributions to 
http://bestinfo-log.com
Looking for changing your car’s brake pads? Need some help. The task is easy. We 
furnish here a few easy and simple steps to help you all the way in changing the brake 
pads of your car. For this, you need to go through these easy steps and follow them.
Purchase the correct brake pads
brake line repair kitWhen you want to change your brake pads, first you need to buy 
the new brake pads. For purchasing brake pads, you must see your car’s specification 
manual and tell the car dealer model of your car so that they will show you quality 
brake pads that matches your car’s brake pad specifications. Choose the best among 
them and buy it. Generally the brake pads that are of high cost last for long time.
 Cool down your car
 After you purchase the brake pad, you must cool down your car if you have driven it 
recently to change the brake pads of your car. It needs to be done because you need 
to work with hot parts so, you should make sure that they are cool and are safe to 
touch.
 Loosen lug nuts, jack up and remove the wheel
 Replacement auto parts reviews Bring your tool box and with a wrench loosen the 
lug nuts of the wheel. Using the wrench place the brake pads and then pump up 
your car by placing the jack in a correct position. Now, it will easy for you to remove 
the loosen wheel of the car.
Use ring spanner of correct size remove caliper bolts
The caliper is on the brake rotor. It will be helpful to slow down the wheel before 
it is taken over by the brake pads. Now, with the help of the ring spanner that 
suits the caliper bolts size, remove the bolts of the caliper gently. Now carefully 
hang the caliper back to the wheel using a wire.
Blend the brakes:
Before you change the calipers and brake pad, you need to blend the brakes. For 
this, you remove the cap of the brake master cylinder to blend the brake fluid, 
which is dirty. Now see the brake fluid is set to bleed before you change the 
brake pads.
Now, you should find the sequence of the bleed in your car manual and place a plastic 
tube to the bleeder nipple then, ask some one to pump the brakes, until they 
experience resistance. If even after compressing, the brake pedal, it shows that there 
are air bubbles in the system. To remove them again bleed them before you close.
Change old pads with new pads:
Now, change the old brake pads with new ones by removing them and check the level 
of the brake fluid, if necessary add some fluid and put back the reservoir cap of brake 
fluid after adding the fluid. Put the caliper back and down the wheel.
Even though the process may be long, you can do it yourself by following the car 
manual and the aforementioned steps. The manual will be helpful if you are not aware 
of the terms stated here. They are related to your car because they may be in image 
form.
Bestinfo-log.com is a website that provides tips and information on 
various categories including  business, technology, health, society and 
living. These news updates and tips in bestinfo-log are intended to help 
people in daily living. For more details on article categories, visit 
http://bestinfo-log.com
Thank you for spending your precious time in reading this article.