Best Quick light weight tiles adhesive Manufacturer UAE
                     Best Quick light weight tiles adhesive 
Manufacturer UAE
Ideal for glueing thin porcelain tiles, this one-component, high-performance 
cementitious adhesive is highly deformable, light, quick to set, and hydrate. It also 
has a good trowelability, high wetting capacity, and a very high yield.
WHERE TO USE
Bonding ceramic tiles of various shapes and sizes (including double-fired, single-fired, 
porcelain tile, klinker, terracotta, etc.) on both interior and external substrates 
Bonding thin porcelain tiles of all shapes and sizes to floors and walls, including 
exterior façades; Bonding stone to interior and external substrates. Any type of 
mosaic can be adhered to indoor and outdoor substrates, including swimming 
pools.ideally suited for usage on expansive floor surfaces and the installation of 
large-format tiles without the need for back butter.It is especially well suited for 
installing any sort of thin porcelain tile (using the double buttering technique), 
including on thermal insulation systems like the Mapetherm Tile System, because of 
its great wetting capacity on the backs of tiles.
APPLICATIONS
Single-fired, double-fired, klinker, terracotta, porcelain and thin 
porcelain tiles and ceramic and glass mosaic · Natural stone (marble, 
granite, etc.) which requires the use of rapid adhesives on; – no-slump 
consistency cementitious screeds, self-levelling cementitious screeds 
and anhydrite screeds (after applying a suitable primer) – heated 
screeds – cementitious render or lime-mortar render – gypsum-based 
render (after applying a suitable primer) – plasterboard, precast panels 
and cement-fibre panels – waterproofing membranes made using 
Mapelastic, Mapelastic Smart, Mapelastic AquaDefense, Monolastic 
and Mapegum WPS. 
ULTRALITE S2 QUICK
TECHNICAL DATA:
Pot life of mix: 50 minutes.
Open time: ≥ 30 minutes.
Set to light foot traffic: 2-3 hours.
Ready for use: 24 hours.
Colours: grey and white.
Application: N° 4, 5, 6 or 10 notched trowel.
Deformability according to EN 12004: S2 - highly deformable.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Choose the best Highly Deformable S2 Adhesive Dubai from Mapei.
TECHNICAL CHARACTERISTICS
• Ultralite S2 Quick is a grey or white powder made from special binders, selected graded sand and a high quantity of
• synthetic resin, with added micro-spheres of recycled silica material which help to make the mix lighter, according to a
• special formulation developed in MAPEI’s Research Laboratories, which contributes to the development of ecosustainable building industry.
• The special technology used to manufacture Ultralite S2 Quick gives it a low density, a characteristic which offers two
• main advantages:
• 1. Bags of Ultralite S2 Quick have the same volume but weigh less (15 kg) than bags of conventional cementitious
• adhesive (25 kg). This ensures easier handling and savings in transport costs
• 2. Higher yield: Yield is approximately 80% higher than conventional MAPEI cementitious adhesives of class S2.
• Ultralite S2 Quick mix has a low viscosity, which makes it easier and quicker to apply. The product’s excellent wetting
• capacity on the back of tiles means that the double buttering technique may be avoided when laying large tiles in internal
• environments. Its excellent back-face buttering capacity also makes this adhesive particularly suitable for laying thin
• porcelain tiles. For further details please refer to the relevant technical notebook (“Systems for installing thin porcelain
• tiles”)