How To Maintain Couplings And Mounts
                     How To Maintain 
Couplings And 
Mounts
Operating revolving equipment means you must know how to
maintain both mounts or flange couplings. It will save you money,
time, and inconvenience if your engine parts are well-maintained.
How To A misalignment can create vibrations and make your machinery
unnecessarily wear and tear. Engine mount suppliers could guide
Maintain you in maintaining, restoring, or replacing them, but a little extra
Couplings self-maintenance check won't harm you.
And How Do Couplings and Mounts Work?
Mounts Flange Couplings Connect Two Shafts
Flange couplings are rigid couplings used to connect two shafts
with a difference in diameter. The flanges are inserted on each end
of the shafts and tightened with bolts.
2
The flanges may have a spigot or pilot hole, depending on the
design.
How To Couplings Transmit Heavy Loads
Rigid couplings comprise two perpendicular flanges and are usually
Maintain constructed from dangerous materials. They are used on large and
heavy shafts.
Couplings Mounts Help Reduce Engine Noise
And Engine mount helps reduce noise and discomfort for powerboats,
pontoons, and sailboats. They're also easy to install.
Mounts Alternatively, marine engine mount is used for marine internal
combustion engines and gearboxes. These mounts are specially
designed to isolate vibrations and structural noise transmission.
3
Taking Care of Couplings and Mounts
Perform Regular Inspection
How To Performing a regular inspection is essential for maintaining your
equipment. In addition to checking for signs of wear, you will also
Maintain need to inspect the internal components to ensure no problems.
Couplings Lubrication is Important
Couplings and mounts that are not lubricated will deteriorate,
And causing them to fail. This leads to decreased performance and
unplanned downtime.
Mounts You must ensure that the sealing surfaces are free of
contamination. Lubricant thickness is also a factor. Manufacturers
have different lubrication specifications for their products.
4
Avoid Misalignment
Bumps cause misalignments during motion, thermal expansion, or
movement of the shaft itself. It is important to ensure that there is
How To proper alignment before installation.
Maintain It is also possible for misalignments to occur after installation, andit results in reduced performance, power loss, and vibration.
Couplings Check for Dirt or Particles Entering the Engine
And Another problem that can result in a failed coupling is foreignparticles entering the machine. This can be caused by improper
Mounts cleaning or relubrication.
The seals can be cleaned using an abrasive cloth wrapped around a
flat file. If any foreign particles are found, they should be removed
immediately.
5
Looking for Enhanced or Replacement Parts?
A high-performance coupling and mount are designed to last.
How To However, due to the nature of its operation, it can be susceptible
to damage. To reduce this risk, have your parts checked and
Maintain repaired regularly. Even though it can be costly, a new coupling
can be an affordable solution.
Couplings Poly Flex is an Australian reputable, a trusted manufacturer of
And engine mounting systems, couplings, and hull to deck joining
methods. Visit our website and learn more.
Mounts
6
How To Maintain 
Couplings And 
Mounts