airdopes-131-manual
                     In the box Power On (First Time User) Single Earbud Usage LED Indicators / Functionalities Charging The Case Charging The Earbuds
1 1x pair of Ear-Buds 4 1x User Manual Step 1:  To automatically switch the earbuds on (Smart Power 
On) simply open the lid of the charging case. When you open the Step 1: Please note that both the earbuds can be used in mono Step 1: To charge the case, plug one end of the charging cable into the Step 1: Please insert the earbuds back inside the charging case in 
Get. Set. 2 1x Charging Case 5 1x Charging Cable lid of the case, our IWP™ (Insta Wake N’ Pair) Technology enables mode. Use either of the two options; Smart Power On or Manual the earbuds to power on automatically, get connected and enter case and the other end into a USB port/adapter correct orientation.Power On for switching on the desired earbud
3 2x Pairs of Additional Earmus into the connection mode
Play. Long press the MFB on either earbud for 2 seconds
Step 2: Flashing white LEDs indicate that the charging case is being Step 2: A solid white LED will indicate that the earbuds are being 
OR Step 2: The selected earbud will automatically enter the connection 2 Seconds  to activate Voice Assistant charged. Once the charging case gets fully charged, the LEDs turn into 
mode. charged. Once fully charged the LED turns oProduct Overview To manually switch the earbuds on (Manual Power On), long solid white
press the Multifunction Button (*MFB) on both earbuds for 3 
seconds until the LED starts to ash in blue Step 3: Turn on Bluetooth on your phone/media device and search 3 Seconds Step 3: Once the earbuds are fully charged, the charging case Long press the MFB on both earbuds for 3 seconds
1 MFB (Multi Function Button) 3 Charging Port for ‘Airdopes 131’ to connect automatically switches o to save power.Step 2: Both the earbuds will automatically pair with each other. to manually Power On (Blue LED)
Get ready to get yourself soaked in / Power Button The earbuds will enter into the Connection Mode Notes: Note:
musical bliss with your very own pair of 2 Indicator Lights Step 3: Turn on the Bluetooth functionality on your  5 Seconds Long press the MFB on either earbud for 5 seconds •     Before using the ear-buds for the rst time, it is recommended to phone/media device and scan •     To switch to Stereo mode, simply take out the other earbud from in order to manually switch o the earbuds (Red LED)
boAt Airdopes 131. Please consider this the case. It will automatically power on and pair with the previously fully charge the ear-buds. Also, please keep the lid of the charging Step 4: Search for ‘Airdopes 131’ and pair accordingly. Enter 
manual as your guiding map towards the ‘0000’ as the passkey if asked. selected earbud, hence enabling Stereo usage.
case closed while charging and use a 5V/2A adaptor
Triple Tap Triple tap the MFB on both earbuds to perform the
shores of musical bliss. Knowledge of Congratulations! Your earbuds are now connected successfully •     You cannot skip tracks or return to the previous tracks in Mono reset (Red LED)31 via Bluetooth Bluetooth mode.
Bluetooth and device connectivity is 
essential for steering this boat and Power On (Subsequent Usage)
Airdopes 131
therefore we strongly recommend 23 IWP Technology: The next time you when you open the lid of the 
thorough reading of this manual; you may case, our IWP™ (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically, and get connected to the 
also refer to the same at times when you previously connected device.
Notes: 
face any sort of diculty in future. •     Pairing mode lasts for 5 minutes. If the pairing time is missed 
then you will need to reconnect the ear-buds and follow the 
above mentioned procedure
•    Airdopes 131 remembers previously connected devices; once 
switched on, the ear-buds automatically reconnect to the MFB
previously connected device (Multi Function Button) Note - The LED lights located on the charging case indicate the battery status
of the case.
3
Voice Assistant
Smart Power O Basic Functions Factory Reset Common Problems with Solutions
Specications Warning
Step 1: Long press the MFB on either earbud for 2 seconds to •     Please follow the instructions to operate
activate the voice assistant •     Please charge the ear-buds with input power below 5V/2A in order Bluetooth Version V5.0
Step 1: After usage, remove both the earbuds from your ears Voice Assistant: Long press the MFB on either earbud for 2 seconds to Perform the Factory Reset in case you face any diculty while If only one earbud is functioning:       to protect the batteryDriver Size 13mm
Step 2: The respective voice assistant screen pops up and activate the voice assistant operating your Airdopes 131 •     Please don’t use the ear-buds in extreme temperatures
Get. Set.
SNR 90dB
you may place your commands at ease •     Please don’t use the product near waterStep 2: Place the earbuds back inside the charging case in correct 
Step 1: Keep both the earbuds inside the case in their correct Music Playtime Up to 3 Hours (Up to 12H with Case) •     Please keep the product away from heat sources, as the
orientation and close the case lid Answer/Hang Up Call: Single press the MFB on either earbud to answer 
Tips: You may try the following commands, orientation Talk Time Up to 3 Hours
       heat may damage it
an incoming call and once again to hang up an ongoing call •     Don’t jam the ports such as charger port, LED port, etc. Play.
Standby Time 100 Hours
•     What is the weather? Step 3: The earbuds will automatically switch o (and enter into Step 2:  Triple tap the MFB on both earbuds to perform the reset. Red Simply insert the earbuds back into the
•     It is recommended to utilize the product below the
LED blinks for 1 sec to indicate the same  Transmission Range 10m       maximum volume in order to protect hearing and extend•     Play a song charging mode.) Reject Call: Long press the MFB for 2 seconds to reject incoming calls. case and take them out or perform the THD