10 Bike Maintenance Tips to Extend Your Bike Life
                     10 Bike Maintenance 
Tips to Extend Your Bike 
Life
Bikechuno.com @Bikechuno @Bikechuno
How to Extend Your Bike Life?
First and foremost, it's important to check your engine oil level regularly. If the oil level 
drops too low, it can cause serious damage to your engine. You should also check the 
oil filter and air filter regularly and replace them if necessary.
Secondly, keep an eye on your bike tyres. Check the treads regularly to make sure they 
are in good condition and inflate them under the proper pressure. If you notice any flat 
spots or cracks, it's time to get new tyres.
Lastly, don't forget about your bike battery. Check terminals and cables regularly to 
ensure they are clean and free of rust. If your battery is more than three years old, it's 
time to replace it.
Bikechuno.com @Bikechuno @Bikechuno
10 BIKE MAINTENANCE TIPS 
TO EXTEND YOUR BIKE LIFE
• Check Engine Oil Level
• Check Tyre Pressure
• Clean Air Filter
• Check Bike Transmission
• Clean and Service Your Bike Regularly
• Maintain Your Bike Battery
• Maintain Engine and Clean Carburetor
• Adjust Bike Clutch
• Replace Brake Shoe/Pads
• Ride at Slow Speed
Bikechuno.com @Bikechuno @Bikechuno
1. Check Engine Oil Level
It is important to check your engine oil level regularly, as it can affect the performance 
of your vehicle. Low oil levels can damage the engine, so it's best to keep an eye on it. 
To check your engine oil level, simply remove the dipstick from the engine and clean it. 
Put it back in the engine and take it out again to check the oil level. If it is low, top it off 
with the right type of oil.
2. Check Tyre Pressure
The most important thing you can do to maintain the safety and performance of your 
bike is to check tyre pressure regularly. Incorrect tyre pressure can lead to many 
problems, including decreased fuel efficiency, reduced handling, braking ability, and 
increased wear and tear in tyres.
Bikechuno.com @Bikechuno @Bikechuno
3. Clean Air Filter
A clean air filter is important to extend the engine life. First, it allows the engine to 
breathe properly and run smoothly. Second, it helps improve fuel efficiency. Third, it 
helps to extend the life of the engine. Fourth, it helps to keep the environment clean 
by reducing emissions. Fifth, it helps to keep the rider safe by preventing dirt and 
debris from entering the engine.
4. Check Bike Transmission
To ensure that your bike's transmission is in good working condition, it is essential 
to inspect it regularly. You should check the condition of the chain, sprockets, and 
gears, and make sure that there is no excessive wear or damage. It is also 
essential to check the transmission fluid level and condition and ensure that there 
are no leaks.
Bikechuno.com @Bikechuno @Bikechuno
5. Maintain Your Bike Battery
Keeping your bike battery in good condition requires proper care. This includes 
cleaning it regularly and making sure it has enough electrolytes. You should also 
avoid discharging it too much, as this can damage the battery. If you need to 
replace your bike battery, make sure it is compatible with your bike.
6. Clean and Service Your Bike Regularly
If you ride your bike regularly, it's important to clean and service it regularly. This 
will help to keep it in good condition and ensure that it performs well.
While cleaning pay particular attention to the chain and brake shoes, as these 
are the parts that are most likely to get dirty and require regular cleaning. Once 
you've cleaned your bike, you should then carry out a basic service. 
Bikechuno.com @Bikechuno @Bikechuno
7. Maintain Engine and Clean Carburetor
Your bike's engine carburetor is one of the most important parts of your engine, and 
keeping it clean is essential to keeping your engine running smoothly. First, remove 
the carburetor from the engine and disassemble it. Next, use carburetor cleaner to 
clean all parts of the carburetor. Be sure to pay special attention to jets, as they can 
become clogged with dirt and debris. Once everything is clean, reassemble the 
carburetor and reinstall it on the engine.
8. Avoid Parking in the Sunlight
Maintaining your bike clutch regularly can improve the performance of your bike. 
When your clutch is serviced, make sure it has a proper amount of free play.
Bikechuno.com @Bikechuno @Bikechuno
9. Replace Brake Shoe/Pads
It is important to keep your bike brakes at the proper distance. Making sure they are 
not too tight or too loose is an important safety concern. If your brakes are squeaky, 
replace them as soon as possible.
10. Ride at Slow Speed
Slow riding can improve your bike's engine efficiency over time, as it allows the 
engine to run more smoothly and with less resistance. In addition, riding at a slower 
speed reduces fuel consumption, allowing you to enjoy an eco-friendly and 
economical journey.
Bikechuno.com @Bikechuno @Bikechuno
For More Information, Please Visit
w w w . b i k e c h u n o . c o m
Bikechuno.com @Bikechuno @Bikechuno
THANK YOU!!
Bikechuno.com @Bikechuno @Bikechuno