NCIE-SAN, E-Series NS0-515 Dumps
                     NS0-515
Practice Questions
NetApp Certified Implementation Engineer-SAN Specialist
Question 1
You are setting-up asynchronous mirroring between two E2860 
systems
In this scenario, which two prerequisites are required to complete the 
setup? (choose two)
A. both the primary and secondary systems must be using the same 
subnets for mirroring connections
B. The secondary system must have 2X the storage capacity of the 
primary system
C. Both systems must be discovered by an Enterprise Management 
Window (EMW) or SANtricity Unified Manager
D. Both the primary and secondary systems must have the same 
premium features licensed
Answer: CD
Question 2
An orphaned volume occurs during an asynchronous mirror 
implementation. You must recover the orphaned volume.
In this scenario, which statement is correct?
A. Deactive the mirror consistency group that contains the 
orphan then re-enable the group
B. Perform a role change on the orphan then re-create the 
mirroring relationship
C. Remove the mirroring relationship on the orphan then re-
create the mirroring relationship
D. Suspend mirroring operations on the orphan then resume 
operations
Answer: C
Question 3
Which file contains the configuration for a multipath driver for 
FC on Linux systems?
A. /opt/multipath/multipath.cnf
B. /etc/multipath.conf
C. /etc/dm-multipath.conf
D. /etc/kernel/mp.conf
Answer: B
Question 4
What does the CHAP secret accomplish for an E-Series system?
A. Ethernet management authentication
B. SAS authentication
C. FC authentication
D. iSCSI authentication
Answer: D
Question 5
Referring to the exhibit, which three statements are true? 
(Choose three)
A. There are two FC/iSCSI host ports available
B. There are two SAS expansion ports available
C. There are four SAS host ports available
D. There are six SAS host ports available
E. There are two Base-T iSCSI ports available
Answer: ABC
Question 6
The Netapp E-Series system with a 32 Gb FC Host Interface Card 
(HIC) requires which type of fiber cable to connect to switches or 
to connect directly to hosts extending up to 100 meters?
A. OM4
B. OM3
C. OM2
D. OM1
Answer: B
Question 7
What are two methods for setting the host protocol 
configuration on the E2800 controller with a 4-port 16Gbps FC 
or 10Gbps iSCSI SFP+ host interface card (HIC)? (Choose two)
A. Change the feature pack in the SANtricity System Manager.
B. Set in the hardware tab using SANtricity System Manager
C. Set at the factory based on the order.
D. Change the QSFP type in the HIC
Answer: AD
Question 8
Which three documents should be provided to the customer after the e-
Series installation is complete? (choose three.)
A. a document showing how much space is available for system expansion
B. a b a document with IMT pages that show the supported host 
configuration and fabric switches in the solution
C. a document showing available power on the UPS with no equipment 
connected
D. a document showing the cabinet layout with cabling information and IP 
addresses being used
E. a document showing user IDs and passwords for all deployed devices
Answer: BDE
Question 9
An E2812 system, without expansion shelves, is configured with 12 Gb 
SAS host interface cards (HICS) and is directly connected to a host.
However, the host cannot access the volumes.
In this scenario, which two troubleshooting steps should you take? 
(Choose two)
A. Verify that the E2812 host port SAS link up lights are illuminated
B. Verify that the E2812 SAS CHAP secret is set.
C. Verify that the correct SAS ports are in use on the E2812 system
D. Verify that the host can ping the E2812 system over the SAS link
Answer: AC
Question 10
To enable one-way authentication in a new iSCSI Linux 
implementation, which three modifications should you make in 
the /etc/iscsi/iscsi.conf file on the Linux host? (Choose three.)
A. the initiator username and password
B. sendtargets discovery
C. CHAP
D. iSCSI
E. the target username and password
Answer: BCE
https://www.passcert.com/NS0-515.html
100% help you pass 
NetApp NS0-515 Exam