2020 Valid CWNP PW0-105 Exam Questions
                     Vendor: CWNP
Exam Code: PW0-105(PW0-104 or PW0-100)
Exam Name: Certified Wireless Network Administrator 
(CWNA)
Version: Demo
https://www.realexamcollection.com/cwnp/pw0-105-dumps.html
QUESTION 1
Given: Your consulting firm has recently been hired to complete a site survey for ABC Company. Your
engineers use predictive modeling software for surveying, but ABC Company insists on a pre- deployment
site visit.
What tasks should be performed as part of the pre-deployment visit to prepare for a predictive survey?
(Choose two)
A. With a spectrum analyzer, identify the type, amplitude, and location of RF interference sources, if any
are present.
B. Evaluate the building materials at ABC's facility and confirm that the floor plan documents are
consistent with the actual building.
C. Validate that the AP transmit power and antenna type is identical for each AP in ABC's existing
deployment.
D. Collect information about ABC Company's security requirements and the current configuration of their
RADIUS and user database servers.
E. Simultaneously capture and analyze data on each 802.11 channel to establish a baseline for potential
network capacity and throughput.
Correct Answer: AB
QUESTION 2
What 802.11n technologies require MIMO support on both the transmitter and receiver? (Choose 2)
A. Spatial multiplexing
B. Transmit beamforming
C. Maximal ratio combining
D. Space-time block coding
E. Cyclic shift diversity
F. Short guard intervals
Correct Answer: AD
QUESTION 3
What statement describes the authorization component of a AAA implementation?
A. Verifying that a user is who he says he is
B. Validating client device credentials against a database
C. Logging the details of user network behavior in order to review it at a later time
D. Granting access to specific network services according to a user profile
E. Implementing a WIPS as a full-time monitoring solution to enforce policies
Correct Answer: D
QUESTION 4
What facts are true regarding controllers and APs in a Split MAC architecture? (Choose 2)
A. An IP tunnel is established between the AP and controller for AP management and control functions.
B. Using centralized data forwarding, APs never tag Ethernet frames with VLAN identifiers or 802.1p CoS.
C. With 802.1X/EAP security, the AP acts as the supplicant and the controller acts as the authenticator.
D. Management and data frame types must be processed locally by the AP, while control frame types
must be sent to the controller.
E. In a distributed (local bridging) data forwarding model, the AP handles frame encryption and
decryption.
Correct Answer: AE
QUESTION 5
What feature(s) are most likely to be supported by 802.11 enterprise-class WLAN controllers? (Choose 4)
A. Link aggregation / port trunking
B. 802.1p and DSCP QoS
C. BGP and Frame Relay
D. Captive web portals
E. IGMP snooping
Correct Answer: ABDE
QUESTION 6
Given: You are the network administrator for ABC Company. Your manager has recently attended a
wireless security seminar. The seminar speaker taught that a wireless network could be hidden from
potential intruders if you disabled the broadcasting of the SSID in Beacons and configured the access
points not to respond to Probe Request frames that have a null SSID field.
Your manager suggests implementing these security practices. What response should you give to this
suggestion? (Choose two)
A. Any 802.11 protocol analyzer can see the SSID in clear text in frames other than Beacons and Probe
Response frames. This negates any security benefit of trying to hide the SSID in Beacons and Probe
Response frames.
B. This security practice prevents manufacturers' client utilities from detecting the SSID. As a result, the
SSID cannot be obtained by attackers, except through social engineering, guessing, or use of a WIPS.
C. Although it does not benefit the security posture, hiding the SSID in Beacons and Probe Response
frames can be helpful for preventing some users (such as guests) from attempting to connect to the
corporate network.
D. Any tenants in the same building using advanced penetration testing tools will be able to obtain the
SSID by exploiting WPA EAPOL-Key exchanges. This poses an additional risk of exposing the WPA
key.
E. To improve security by hiding the SSID, the AP and client stations must both be configured to remove
the SSID from association request and response frames. Most WLAN products support this.
Correct Answer: AC
QUESTION 7
What component of the 802.11 standard allows stations to reserve access to the RF medium for a
specified period of time?
A. Long slot times
B. DTIM Interval
C. Listen Interval
D. Probe Request frames
E. RTS or CTS frames
Correct Answer: E
QUESTION 8
Given:
Network users and IT personnel at a large machinery manufacturer have been discussing the potential
uses and benefits of implementing an indoor WLAN. The network administrator and network manager
have requested a meeting of senior management personnel to discuss a WLAN implementation before
taking any site survey or implementation steps. The first order of discussion in the meeting is corporate
policy concerning implementation and use of WLAN technology.
What specific topics are appropriate in this policy meeting? (Choose two)
A. Vendor hardware recommendations
B. Business justification
C. User productivity impact
D. Antenna types
E. Obtaining permits and zoning requirements
Correct Answer: BC
QUESTION 9
In a long-distance RF link, what statement about Fade Margin is true?
A. Fade Margin is an additional pad of signal strength designed into the RF system to compensate for
unpredictable signal fading.
B. The Fade Margin of a long-distance radio link should be equivalent to the receiver's antenna gain.
C. A Fade Margin is unnecessary on a long-distance RF link if more than 80% of the first Fresnel zone is
clear of obstructions.
D. The Fade Margin is a measurement of signal loss through free space, and is a function of frequency
and distance.
Correct Answer: A
QUESTION 10
What statement best describes the manual RF site survey report?
A. It is a series of notes taken during the interview with the network manager and given to the site survey
project manager.
B. It is a one-page network inspection summary used to create a certificate of network compliance.
C. It contains the results from the RF coverage, capacity, and interference analysis.
D. It is an internal document used by the site surveying firm for network deployment, and is not usually
shown to the client.
E. It states the customer requirements, business justification, and a detailed budget for the WLAN.
Correct Answer: C
https://www.realexamcollection.com/cwnp/pw0-105-dumps.html