How to apply touch-up spray paint professionally on
                     How to apply touch-up 
spray paint professionally 
on your car.
Com-Paint
Using a paint spray can to apply touch-up paint 
to your car and make it look professional is 
quite simple. You just need to follow the 
instructions laid down here and remember 
practice makes perfect! Practice off the vehicle 
first. Take some time to master it and 
fortunately it is quite easy to get hang of it in 
no time.
Find and order the correct car paint:
Com-Paint offers a wide range of spray 
paints specific to every major 
automobile company in the Indian 
market. Make sure to select your car's 
exact colour as mentioned in the RC 
(Registration Certificate)of your vehicle 
from the list available on the website. 
We recommend you to use our Spray 
Paint for Cars to get awesome results.
Test the colour match and practice off the vehicle:
Before applying the spray paint on your 
precious car, try our spray paint on 
hidden part of your car. Let it dry, and if 
it looks satisfactory, you are ready for 
the main thing.
Opt for the right painting conditions: :
To get the best results, select a 
low humidity place and is covered 
to prevent direct sunlight. The 
designated area should also lie in 
the temperature range of 20°C-
22°C.
Prepare your vehicle:
Clean the area you want to touch up 
with soft dry clothe. If your existing 
auto paint is rusty, use 2500 grit 
sandpaper to remove all the traces 
altogether.
Apply Com-Fill scratch filler to any spot where the paint has been 
scratched off completely:
We recommend using very thin 
layers of Com-Fill scratch filler 
and letting it dry out for 30 
minutes.
Apply a base coat of Com-Paint's Spray Paint for cars:
You have to be very careful during this 
step as it requires steady hands and a 
lot of patience. Apply thin coats of 
base paint, one on top of another, wait 
for five minutes then apply second 
coat.
Use Com-Merge Finish Solvent to Make it shine:
Wait for 15 min after applying the paint. 
Then use the Com-Merge on the double 
area from a distance of 35 cm /16” on 
the peripherical area of the touchup 
spray in stroking motion to avoid 
dripping.
Use Com-Cut for Restores Original Colour & Shine:
Apply the Com-Cut after 24 hours. 
Apply with a soft cloth, working on 
scratches or small area at a time. Take a 
wet cloth and rub by exerting a little 
hand pressure. Wipe off with a clean 
cloth.
THANK YOU