Real Cisco 350-401 Dumps PDF - 350-401 Questions Answers
                      
 
Cisco
 
350-401
Implementing Cisco Enterprise Netwo rk Core Technologies (ENCOR)
 
 
 
https://www.exam4lead.com/cisco/350-401-dumps.html
 
 
 
Question: 1 
   
What does this EEM applet event accomplish? 
"event snmp oid 1.3.6.1.3.7.1.5.1.2.4.2.9 get-type next entry-op g entry-val 75 poll-interval 5" 
 
A. It issues email when the value is greater than 75% for five polling cycles. 
B. It reads an SNMP variable, and when the value exceeds 75%, it triggers an action GO. 
C. It presents a SNMP variable that can be interrogated. 
D. Upon the value reaching 75%, a SNMP event is generated and sent to the trap server. 
 
Answer: B     
 
Question: 2 
   
Refer to the exhibit. 
 
Which IP address becomes the next active next hop for 192.168.102 0/24 when 192.168.101.2 fails? 
 
A. 192.168.101.18 
B. 192.168.101.6 
C. 192.168.101.10 
D. 192.168.101.14 
 
Answer: A     
 
Question: 3 
   
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a 
network? 
 
A. security group tag ACL assigned to each port on a switch 
B. security group tag number assigned to each port on a network 
C. security group tag number assigned to each user on a switch 
D. security group tag ACL assigned to each router on a network 
 
 
Answer: B     
 
Question: 4 
   
Which action is the vSmart controller responsible for in an SD-WAN deployment? 
 
A. onboard vEdge nodes into the SD-WAN fabric 
B. distribute security information for tunnel establishment between vEdge routers 
C. manage, maintain, and gather configuration and status for nodes within the SD-WAN fabric 
D. gather telemetry data from vEdge routers 
 
Answer: B     
 
Question: 5 
   
Refer to the exhibit. 
 
Link1 is a copper connection and Link2 is a fiber connection The fiber port must be the primary port 
for all forwarding. The output of the show spanning-tree command on SW2 shows that the fiber port 
is blocked by spanning tree. An engineer enters the spanning- tree port-priority 32 command on 
GO/1 on SW2. but the port remains blocked. Which command should be entered on the ports that 
are connected to Lmk2 to resolve the issue? 
 
 
A. Enter spanning-tree port-priority 32 on SW1. 
B. Enter spanning-tree port-priority 224 on SW1. 
C. Enter spanning-tree port-priority 4 on SW2. 
D. Enter spanning-tree port-priority 64 on SW2. 
 
Answer: D     
 
Question: 6 
   
DRAG DROP 
Drag and drop the characteristics from the left onto the correct routing protocol types on the right. 
 
 
Answer:   
 
 
 
Question: 7 
 
Which two protocols are used with YANG data models? (Choose two.) 
 
A. HTTPS 
B. SSH 
C. RESTCONF 
D. TLS 
E. NFTCONF 
 
 
Answer: CE     
 
Question: 8 
   
Which protocol does REST API rely on to secure the communication channel? 
 
A. TCP 
B. HTTPS 
C. SSH 
D. HTTP 
 
Answer: B     
 
Question: 9 
   
Which JSON syntax is valid? 
 
 
A. Option A 
B. Option B 
C. Option C 
D. Option D 
 
Answer: B     
 
Question: 10 
   
Which two descriptions of FlexConnect mode for Cisco APs are true? (Choose two.) 
 
A. APs that operate in FlexConnect mode cannot detect rogue APs 
B. FlexConnect mode is used when the APs are set up in a mesh environment and used to bridge 
between each other. 
 
C. FlexConnect mode is a feature that is designed to allow specified CAPWAP-enabled APs to exclude 
themselves from managing data traffic between clients and infrastructure. 
D. When connected to the controller, FlexConnect APs can tunnel traffic back to the controller 
E. FlexConnect mode is a wireless solution for branch office and remote office deployments 
 
Answer: CD     
 
 
https://www.exam4lead.com/cisco/350-401-dumps.html