We have designed 200-301 dumps PDF with a view that study smart is a tool for success. You don’t need to know more than you are delivered information in this handy study material. Grab all the concepts scattered in this study stuff in the form of questions and answers and get passed by the first attempt. 200-301 dumps material comes with money back guarantee which shows the confidence of the experts about your success. If you are scrabbling for a reliable study material then 200-301 dumps is the best one. It contains all the information about all the exam topics and is verified by the experts who are well aware of exam type. Once you download this dumps material from Exam4Lead you get the key to success. Now you can ace your certification by your desired grades. We are offering you money back guarantee which is actually guarantee for you success with 200-301 dumps. Don’t care for anything and start your preparation under experts’ supervision. Never waste your time searching for a study material for your 200-301 exam preparation because now you have 200-301 briandumps. If you memorize this study material from start to end then you can answer any question in the final exam. This guide has been designed in PDF format so that you can have an advanced reading experience. Furthermore, you can access your data anywhere anytime from your device. All the data is experts’ verified with money back guarantee. So you just need to put your focus at 200-301 dumps and meet your definite success. Experts at Exam4Lead will always be there for your help and support.
Updated Cisco 200-301 Real Exam Questions Answers-Cisco 200-301 Test Engine
Cisco
200-301
Cisco Certified Netw ork Associate
https://www.exam4lead.com/cisco/200-301-dumps.html
Latest Version: 30.0
Question: 1
What is a benefit of using a Cisco Wireless LAN Controller?
A. Central AP management requires more complex configurations
B. Unique SSIDs cannot use the same authentication method
C. It supports autonomous and lightweight APs
D. It eliminates the need to configure each access point individually
Answer: D
Question: 2
Which network allows devices to communicate without the need to access the Internet?
A. 1729.0.0/16
B. 172.28.0.0/16
C. 192.0.0.0/8
D. 209.165.201.0/24
Answer: B
The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from
172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to 192.168.255.255
Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
Question: 3
Which result occurs when PortFast is enabled on an interface that is connected to another switch?
A. Spanning tree may fail to detect a switching loop in the network that causes broadcast storms
B. VTP is allowed to propagate VLAN configuration information from switch to switch automatically.
C. Root port choice and spanning tree recalculation are accelerated when a switch link goes down
D. After spanning tree converges PortFast shuts down any port that receives BPDUs.
Answer: A
Enabling the PortFast feature causes a switch or a trunk port to enter the STP forwarding-state
immediately or upon a linkup event, thus bypassing the listening and learning states.
Note: To enable portfast on a trunk port you need the trunk keyword “spanning-tree portfast trunk
Question: 4
When configuring a WLAN with WPA2 PSK in the Cisco Wireless LAN Controller GUI, which two formats
are available to select? (Choose two)
A. ASCII
B. base64
C. binary
D. decimal
E. hexadecimal
Answer: A, E
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-
4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01010
001.html
Question: 5
Refer to Exhibit.
An engineer is configuring the NEW York router to reach the Lo1 interface of the Atlanta router using
interface Se0/0/0 as the primary path. Which two commands must be configured on the New York
router so that it can reach the Lo1 interface of the Atlanta router via Washington when the link between
New York and Atlanta goes down? (Choose two)
A. ipv6 router 2000::1/128 2012::1
B. ipv6 router 2000::1/128 2012::1 5
C. ipv6 router 2000::1/128 2012::2
D. ipv6 router 2000::1/128 2023::2 5
E. ipv6 router 2000::1/128 2023::3 5
Answer: AE
Floating static routes are static routes that have an administrative distance greater than the
administrative distance (AD) of another static route or dynamic routes. By default a static route has an
AD of 1 then floating static route must have the AD greater than 1. Floating static route has a manually
configured administrative distance greater than that of the primary route and therefore would not be in
the routing table until the primary route fails.
https://www.exam4lead.com/cisco/200-301-dumps.html
Comments