How to Install a Split AC Unit?
                     How to Install a Split Ac Unit?
Installing  a  split  AC  system  is  the  best  way  to  keep  your  house  chilled  and  pleasant
throughout blistering summers. Compared to central ACs, these units have easy installation,
high energy efficiency, and are noise-free. Since these ACs are ductless, they merely require
installing the cooling unit inside and the compressor and condenser unit outside the home
while connecting the units with pipes and a power connection. However, a lack of attention
may complicate the split AC installation task. Moreover, inappropriately installed AC will not
only  be  inefficient  and  trigger  high  energy  bills,  but  it  will  demand  maintenance  more
frequently. 
Yet, if you possess electrical skills and don't want to hire an HVAC company in Sacramento
for AC installation, you can do the task alone. Although every AC unit is distinctive, the
installation procedure is generally similar. Continue reading to learn the process! 
The Steps to Install a Split Ac Unit
Choose the Best Location-
Install a split AC on a solid wall supporting inside and outside units. Even if you haven't
installed an outdoor unit on the same wall, a robust wall will prohibit vibrations from being
generated into the wall. Furthermore, ascertain a 15 cm gap above and around the indoor AC
unit before installing. Also, it must be 7 feet above the ground. 
Install the Mounting Plate and Drill the Exit Hole-
After  selecting  the  location,  horizontally  place  the  mounting  plate  against  the  wall  and
highlight  the  pointers  using  a  pencil  where  fasteners  will  be  drilled.  Now,  insert  plastic
anchors  after  drilling  holes  in  the  marked  areas.  Tighten  the  screws  while  holding  the
mounting plate. Subsequently, drill a 7-8 cm hole in a suitable place for the pipes and wires to
pass to the outside split AC unit. 
Mount the Indoor Ac Unit-
First, remove the AC's front cover to lift it towards the mounting plate. Now, pass the two
copper pipes, drainage pipe, and wire via the outlet hole drilled in the wall. For effective
cooling performance, ensure the bends in the copper pipes are seamless. 
Use electrical tape to tie all four together. After this, attach the front cover to the AC while
ascertaining that it is appropriately mounted to the plate. If you find this installation process
tricky, call the air conditioning service Sacramento professionals for its quality installation.
Now, Install the Outside Unit!
Select the Right Place:
While finding a suitable place, consider avoiding hot or dusty spots. Additionally, maintain a
gap of at least 30-35 cm around the outside unit to achieve optimal functioning. 
Install the Brackets:
Once you've selected the right spot, drill a hole for the brackets and verify they are aligned
horizontally. Employ the fasteners to secure the bracket.
Mount the Unit and Connect the Wires:
Place the outdoor unit on the bracket while ensuring the screw holes on the bracket and the
AC unit match. Now, secure the unit with the bracket. After this, connect the power wire to
the outdoor unit by following the AC unit's connecting diagram. Adhere to the manufacturer's
instructions while connecting the wires to prevent damage. 
Connect the Copper Pipes:
Clean  the  copper  pipes  using  a  vacuum pump before  connecting  them.  Now,  flare  nuts
connect  the copper pipes to the relevant pipe port.  After verifying that  the flare nuts are
securely fastened, turn on both gas valves.
------ Article Source ------
https://thehomeimproving.com/how-to-install-a-split-ac/