How to Fix the VPN Error in Windows 10
                     How to Fix the VPN Error in Windows 10
How to Fix the VPN Error in Windows 10
VPN stands for Virtual Private Network, and it works as the privacy 
utility tool for the people who wish to secure their online data. It 
prevents their data from getting misused on various online platforms.
But in recent days, various errors are arising based on VPN utility 
program. It is easy to troubleshoot various VPN problems if you know 
the process of fixing a particular issue.
Here are numerous problems and their specific fixing solutions based 
on your VPN. If you wish to fix the VPN issue, then you can follow 
these instructions:
General VPN Issues 
Modifying VPN Registry
In case a registry fails to connect to the subsystem, then it indicates a faulty registry. Here, you have to 
modify your existing registry.
 If you wish to follow this Registry method, then you have to abide by these instructions:
First of all, we recommend you to take a full backup of your current registry as your system may lose 
sensitive data.
Then, press the Win + R keys simultaneously.
A search box will open. Type “Regedit” there.
Now hit the “Enter” tab.
Tap on the “OK” button.
After few moments, a Registry Editor window will launch, and then navigate to the 
“HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\InternetSettings” option. It will 
be on the left side section.
Next, you have to right-click on the option which reads “Internet Settings”.
Then, select “New” and after that, tap on “Key” option.
Now, type “GlobalUserOffline” in the text bar as your fresh key. Then select the same option.
Go to the right-side panel and then double-tap the “DWORD” in order to launch its properties page.
Next, you have to type “1” under the field for value data and hit the “OK” tab to save the changes.
After completing these steps, you have to shut the “Registry Editor” window and make sure that the 
Cisco program is properly running.
Checkiing  Ciisco  AnyConnectt  underr  Compatitibiilliitty  Mode
The  Ciisco  Compatibiilliity  mode  enablles  the  user  to  run  any  earlliier  software  
smoothlly  on  Wiindows  10.
If  you  wish  to  use  the  Cisco  under  this  mode,  then  you  should  follow  these  
iimportant  iinstructions:
Fiirstlly,  search  for  the  “Ciisco  AnyConnect”  shortcut  and  then  hiit  the  riight  tap  on  
it.
Then,  sellect  the  “properties”  tab.
After  that,  tap  on  the  “Compatibiilliity”  option.
Now,  mark  the  box  whiich  says  “Run  thiis  program  iin  compatibiilliity  mode  for”  and  
then  choose  any  earlliier  Wiindows  ediition.
After  that,  press  the  “Apply”  tab.
Fiinalllly,  hiit  the  “OK”  button  to  troublleshoot  the  iissue.
We  hope  that  thiis  iissue  may  be  removed.  If  not,  follllow  any  other  method.
Removiing  WAN  Miiniiportt’’s  IIP,,  IIPv6  and  PPTP  Versiion  Deviices  
First of all, tap the Window + X keys together.
Now, you have to select the “Device Manager” option 
from the given list.
Next, navigate to the “View” tab and hit it to launch the 
particular window. The view is tab is located on Device 
Manager Page.
Then, you have to tap on “Show Hidden Devices” option.
Now, you have to hit all the WAN Miniport devices and 
then remove all there.
Downlloadiing  Ciisco  VPN  Prrogrram
First of all, install the recent version of “Cisco VPN” 
software program. Avoid using the particular installed 
set up file.
After that, you have to install the DNE program 
from Cisco and then download it. You have to make 
sure to get the 32 or 64-bit edition of DNE Software 
so that it looks similar to your particular OS.
Now download your DNE software once again.
Next, download the Cisco VPN file.
Detecting and Deactivating the Connection 
Diagnosing the connection is another way of troubleshooting various VPN issues on Win 
10.
If you wish to fix the VPN issue by detecting your connection, then follow these offered 
steps:
Firstly, hit the Win + X keys simultaneously.
Now, choose the option of “Network Connection” from the available menu.
Once the Network Connections box open, search for the VPN connection of your system.
Then, you have to right-click on “Network Connection”.
After that, select the “Diagnose” option from the available choices inside the menu.
Wait until the scan completes.
In case, you still find the issue related to your VPN, then right-click your VPN connection 
and then hit the “Disable” option there.
Now, you have to wait for a little. Then, you can enable the connection by undergoing 
the same procedures as mentioned above.
Restarting the Tunneling Engine Feature of LogMeIn Hamachi
The  restarting  method  of  LogMeIn  Hamachii  to  troublleshoot  the  VPN  
related  issue  is  effective  and  easy  to  use.  It  is  applicable  only  when  you  use  
the  LogMeIn  as  your  particullar  VPN  program.
If  you  wiish  to  fix  your  VPN  rellated  iissues  wiith  the  LogMeIn  method,  follllow  
these  under  mentioned  steps:
First  of  all,  hit  the  Windows  +  R  keys  together.
Then  type  “services.msc”  in  the  provided  text  box.
After  that,  hit  the  “OK”  tab  or  alternatively,  you  can  press  the  “Enter”  key.
Once  the  windows  related  to  “Services”  appears,  search  for  the  Hamachi  
engiine  serviices.  Then  doublle-tap  the  option.
Next,  hiit  the  “Stop”  tab  iin  case  the  serviice  iis  under  runniing  mode.
Now,  wait  a  bit,  and  after  that,  begin  the  service  again  by  hitting  the  
“Start”  tab.
About me
 Jeniffer Leio is a technical writer and her background is in 
engineering. She has been covering IT-related subjects like 
AI, Operating Systems, Latest Trends, Software, 
Cybersecurity, and Printer Support for a long time. She 
writes blogs, guides, white papers, and essays on several 
platforms. Her appreciated work mainly comes on 
brother printer support.
Source: VPN Error in Windows 10