How Do I Fix Error Code 5b00 For Canon Printer?
                     Canon Printer Error Code 
5b00
Instant Help Solution
What can I do 
if getting 
Canon printer 
error 5b00?
1. Firstly, unplug the power and the 
USB cables from the printer.
1. Reset the 2. Open the cartridge door and press 
down the Power button.
waste ink 3. Continue to hold the Power button 
while plugging the power cord into the 
counter wall socket.4. Keep holding the Power button until 
the printer starts resetting itself.
5. Once all the lights are on, you may 
release it.
6. Wait for the green power light to turn 
off.
7. Then, press and release the Power 
button quickly twice.
8. The green light should blink for a 
few more seconds and finally stabilize.
9. Feel free to close the cartridge door 
and try printing again.
The 5b00 error is often 
caused by ink spills on 
your printer. The same 
applies to a full ink 
absorber or full waste 
ink counter, so reset the 
ink absorber. You may 
actually apply this quick 
fix to clear out many 
error codes that may 
appear when turning 
the printer on.
1. Open the ink cartridge compartment. Depending on the 
Canon printer model you use, this compartment could be in 
the front or the back of the machine.
2. Wait for the ink cartridges to move all the way over.
2. Manually clean 3. Up next, disconnect the printer‘s power cord.
4. Behind the cartridge is a row of white rollers. Look for a 
the waste ink pad small square near the roller that looks like a foam pad.
5. You need to detach the waste ink absorber by pulling 
gently on its rubber frame.
6. Clean it by using a paper towel. Try to collect all ink waste 
on paper towel pieces.
7. Put all the cartridges back in their place.
8. Reinstall the frame in the printer.
9. You may now press and hold the Power button and 
reconnect the power cord.
10. When the printer comes on, release the button.
11. Wait five seconds and push the Power button again. This 
resets the printer‘s internal memory and overrides the 5b00 
error code.
If the issue persists, then you can 
follow the above steps to fix it. 
When these waste ink pads are 
saturated, the printer will notify you 
with an error message like yours. 
Do not panic as a manual clean 
often works like a charm.
You may also use a bucket of soapy 
water. Just be careful to let the 
waste ink absorber soak long 
enough for the ink to get loose 
before you reattach the foam pads 
and install the waste ink.
3. Other 1. If the print head is not 
clean, this can often lead to 
potential this error. Check your print 
head properly and make 
solutions sure it is clean too.
2. Also, check the ink level 
of the system. If the ink level 
is low, you have no other 
option but to fill it to the 
maximum capacity.
3. Continue the 
troubleshooting process by 
resetting your printer to the 
factory settings.
Those are a 
few 
remedies 
that might 
fix Canon 
printer error 
5b00. Apply 
the above 
steps and 
let us know 
if they 
worked for 
you too.
Contact Us
Website - 
https://www.instanthelpsolution.com/
Phone Us - +1-888-630-4674