DIY BRAKE MAINTENANCE MADE EASY
                     DIY BRAKE MAINTENANCE MADE EASY
Mark Sanford
Writer at Brake System
University providing advice, reviews and information on 
brake system components including 
brake line repair tips at brake system university /
brake line repair kit reviews at break system university
Though some automotive mechanics want everyday people to think brake 
maintenance is an egregiously difficult challenge that takes a considerable 
amount of time, effort, and knowledge, the little-known truth is you can 
perform brake maintenance on your own. In particular, brake maintenance 
on older vehicles is easy as they have fairly straightforward brake systems 
with comparably few parts, components, and systems to tend to. Let’s take 
a quick look at how to perform DIY brake maintenance.
PREPARE FOR THE PROJECT
A few tools will be necessary to perform brake maintenance in the proper manner. 
Those who work on their vehicles with any sort of regularity will have the majority of 
these tools on-hand. You will need the following:
• Jack and stands to remove the wheels
• Creeper and roll-around seat to ameliorate access and facilitate comfort during the 
maintenance session
• Lug wrench
• Breaker bar
• Rubber mallet
• Brake cleaner
• Eye protection
• Gloves
• Towels
• Wrenches including a torque wrench and a line wrench for optimal grip
EMBRACE THE CHALLENGE OF CHANGING YOUR VEHICLE’S BRAKE PADS
Changing vehicle brake pads is one of the simplest forms of brake maintenance. 
Every brake pad eventually requires replacement. In general, you can expect 
50,000 miles out of your vehicle’s brake pads. It should take less than an hour to 
swap out the brake pads in the front. Here’s how to do it:
• Remove the wheel along with the caliper
• Pull out the brake pads
• Recess the pistons to the calipers prior to the installation of the new pads with 
the use of a C-clamp
• Leave the worn pad in the cradle with a clamp jaw on the rear of the caliper 
bracket
• Tighten the jaw down on the brake pad
• Remove the master cylinder’s lid, allowing the fluid to move upwards through 
the brake line
CHANGING BRAKE ROTORS AND CALIPERS
Brake rotors are bolted to the hub of the wheel. Ideally, you will swap out the 
brake rotors while the brake pads are off. If your vehicle’s brakes are subjected to 
high levels of heat, opt for 2-piece iron rotors featuring an aluminum hat that 
mitigates the chances of cracking. However, if you use your vehicle for everyday 
purposes rather than racing or mountain-grade descents, factory replacement 
rotors will suffice.
Adding new calipers will only take a couple of minutes. Use a ratchet to take off 
the bolt and access the caliper. Be sure to bleed the brakes after you replace the 
calipers as air will move into the system during this DIY brake maintenance. 
Though tempting, the use of locking pliers to seal off a hose and prevent brake 
bleed is a bad idea as it can lead to internal damage that might not be visible with 
the naked eye.
TEND TO THE BRAKE FLUID
Don’t forget about the brake fluid! Hydraulic brake fluid is the lifeblood of your 
vehicle’s brake system. It is best to change the brake fluid when the brake pedal 
has a sponge-like feel upon the application of foot pressure. If the brake fluid is 
not clear or yellow in hue, change it right away. Be sure to only fill the reservoir 
between the Max and Min indicators. Finally, do not use a brake fluid container 
that has already been opened as the fluid has likely absorbed moisture in the 
meantime.
About Brake System U
Brake System University is a micro site giving advice, reviews, and technical 
information on various brake system components like brake lines, brake 
line kits, and ABS sensors. Brake System University connects you to high 
quality, genuine brake system replacement parts including  replacement 
brake lines, replacement ABS sensors, replacement brake line kits that 
have been tested and reviewed by experts. If you want to replace any 
component of your brake system, then this 
site(https://brakesystems.autopartsu.com/) will helps you in choosing the 
right component. Brake System University connects you to trusted reviews 
and referrals to help you easily make a purchase decision.