What is Ubiquiti UAP-AC-LR Wireless Access Point 1000  Mbit/S White? At an affordable price are available MIATLANTIC  OÜ
                     What is Ubiquiti UAP-AC-LR Wireless Access Point 1000 
Mbit/S White? At an affordable price are available MIATLANTIC 
OÜ 
 Scalable Enterprise Wi-Fi Management: 
UniFi® is a radical Wi-Fi system that combines enterprise-class performance, limitless scalability, and a 
central management controller. The UniFi 802.11AC Dual-Radio Access Point (AP) has a sophisticated 
manufacturing design and can be easily connected using the included mounting hardware. Easily nearby 
via any standard web browser and the UniFi mobile app (iOS or Android), the UniFi Controller software 
is a powerful software train ideal for high-density client deployments that require low latency and high 
uptime presentation.  
Quickly configure and manage enterprise Wi-Fi networks with UniFi Controller software no special 
training is required. RF map and performance competencies, real-time status, automatic UAP device 
detection, and progressive security options are all seamlessly combined. 
 
Packaging Features: 
Use the UniFi Controller to arrange thousands of UniFi APs, map systems, quickly manage system traffic, 
and organize additional UniFi APs. Screen and analyze radio incidences using RF maps for optimal AP 
placement, shape, and troubleshooting. Progressive RF presentation and configuration features 
comprise range analysis, airtime fairness, and band direction-finding. Use configurable reports and 
analytics to succeed large numbers of users and speed up troubleshooting. The Wireless Uplink feature 
enables wireless connectivity between APs for an extended variety. A single wired UniFi AP uplink 
supports up to four wireless downlinks on a single operating band, letting wireless adoption of devices 
by default and real-time net topology change. 
Guest Portal / Hotspot Support: 
Easy customization and options for the guest gateway include authentication, hotspot locations, and the 
ability to use an external portal server. Use Unifi's rate warning for your guest portal/hotspot package 
assistance. Apply different bandwidth rates (download/upload), limit total data practice, and limit usage 
time. A single UniFi Controller consecutively in the cloud can manage multiple sites: multiple circulated 
deployments and multi-tenancy for managed service earners.  
Each site is rationally separate and has its shape, maps, statistics, guest portal, and admin read/write 
and read-only forms. UniFi Controller can manage supple configurations for large dispositions. Create 
multiple WLAN groups and allocate them to the AP's wirelesses. 
The fastening notch will be used with the mounting support to help secure the UniFi AP. (This is 
described further in the Mounting Supports section.) This Gigabit Ethernet port is for power and should 
be linked to the LAN and DHCP attendant. Power can be supplied by an Ubiquiti Systems UniFi switch 
with a PoE or Gigabit PoE connecter (included in a single bundle only).  
Press and hold the reset switch for more than five instants. Otherwise, the UniFi AP can be reset 
remotely via the reset switch located on the bottom of the Gigabit PoE connecter. 
Lock tabs: 
During installation, the fastening tabs on the mounting bracket are enthused from the initial position to 
the final position, and the locking tabs are firmly installed in the locking slots on the UniFi AP to help 
stop theft. Place the mounting support on the wall in the desired location with the arrow mortar up. 
Mark the four rising holes with a pencil.  
Use a 6mm drill to drill the mounting fleabags. If your Ethernet cable runs finished the wall, cut or drill a 
circle around 18mm in length. Then pass the CAT5/6 cable and finished the hole. Insert the bolt 
newscasters into the 6 mm hovels.  
Insert the bolts into the anchors to secure the increasing bracket to the wall. If the Ethernet chain runs 
along the rising surface, remove the cable feed plug. Connect the Ethernet cable to the Ethernet port. 
Align the arrow on the UniFi AP with the arrow on the mounting bracket locking tab. Make sure the 
UniFi AP is securely secured to the mounting bracket. Turn the UniFi AP circular until it locks into place 
and the locking tab is firmly injected into the barring notch. 
To install the PoE adapter: 
Remove the PoE mounting bracket from the adapter, place the bracket in the desired location, and mark 
the two holes. If essential, pre-drill holes and use two fasteners (not comprised) to secure the supports. 
Align the slots on the adapter with the tabs on the PoE rising bracket and slide the connecter down.