Setting up TP-Link RE 300 wifi extender
                              Setting up TP-Link RE 300 wifi extender
In order to setting up TP-Link RE 300 wifi extender, you must do the following steps:
1T. o a power outlet close to your router, connect the extender.
2C. onnect to the WiFi network of the extender using your computer or a mobile device. On the label at the bottom of the 
extender, you'll see the network's name and password.
3G. o to tplinkrepeater.net in a web browser.
4S. elect "Quick Setup" from the tabs.
5A. fter choosing the WiFi network you wish to expand and entering its password, click "Next."
6A. s the extender attempts to connect to your network, wait. This could take a while.
7A. fter everything is set up, you can shift the extender to its final place by unplugging it.
You can check the user manual or ask for advice from TP-Link customer care if you need any help regarding setting TP-Link 
RE 300 wifi extender.
Setting TP-Link RE 300 wifi extender using WPS method 
The following steps for setting TP-Link RE 300 wifi extender using the TP-Link WPS method :
1. Wait for the extender to turn on after plugging it in.
2. Look for the WPS button on your router (this is usually located on the back of the router).
3. For five seconds, press and hold the WPS button on the router.
4. Press and hold the WPS button on the extender for 5 seconds within the next 2 minutes.
5. The extender and router should now be linked.Put the WiFi extender halfway between your 
router and the spot that has bad WiFi coverage.
6. The WiFi signal should now be boosted by the extender in the area that was previously weak.
Refer to the user manual for more help if you need it when setting TP-Link RE 300 WiFi 
extender using the WPS method.
Setting TP-Link RE 300 wifi extender using tether app
You must perform the following steps in order to setting TP-Link RE 300 WiFi Extender using Tether app:
1. Use your mobile device to download the Tether app from the Google Play Store or the App 
Store.Use the WiFi to connect your mobile device to the RE300. 
2. The RE300's bottom label has the default WiFi name (SSID) and password printed on it.Launch the 
Tether app on your smartphone.
3. The RE300 will be found by the app and shown on the screen. To choose the RE300, tap on it.
4. To finish the setup procedure, follow the app's instructions. 
5. You might also need to enter the name and password for your home WiFi.
6. Once everything is set up, you can manage and modify the settings on your RE300 using the 
Tether app.