how do we measure up You can load OBJ and STL 3D models in 3D Measure Up. 3D Measure Up supports both full and partial body parts for extracting measurements. At present, automatic measurements are supported for full-body scans only. All the measurements and landmarks that are extracted automatically or manually are listed in the measurement tree left panel of the application. This tutorial shows how you can use the measurement tree to show, hide, and export the measurements. A. Log-in to the 3D Measure Up application. B. Load the model. Refer: How to load a model. C. Before you perform any operations on the model, align the model. Refer: How to align a model. D. After you align the model, you can extract measurements using the Auto Measure feature. Refer: How to extract measurements automatically. E. You can also use tools in the operations bar to extract custom measurements. Refer: How to extract custom measurements. F. The list of measurements extracted is organized in the measurement tree. Click on the button on the view control bar at the top. G. The measurements tree groups the metrics in the following categories: Measurement Planes On Surface Lengths Straight Distances ISO 8559 points Others There are about 120+ metrics listed in the measurement tree. By default most often referred metrics are selected. H. Common operations on the measurements and landmarks listed in the measurement tree.