AMPP CCI 2 Concrete Coating Inspector Certification Guide
                     AMPP
AMPP-CCI2
ExamName: Concrete Coating Inspector (Level 2) - CBT
Exam Version: 6.0
Questions & Answers Sample PDF
(Preview content before you buy)
Check the full version using the link below.
https://pass2certify.com/exam/ampp-cci2
Unlock Full Features:
Stay Updated: 90 days of free exam updates
Zero Risk: 30-day money-back policy
Instant Access: Download right after purchase
Always Here: 24/7 customer support team
https://pass2certify.com//exam/ampp-cci2 Page 1 of 5
Question 1. (Single Select)
Conventional spray zinc primer concrete repair: oil separator fails blotter (dirty). Command?
A: Use airless instead
B: Halt, replace separator/filter
C: Continue, monitor fisheyes
D: Drain pot, restart
Answer: B
Explanation:
Dirty air contaminates zinc suspension, causing fisheyes/pinholes on concrete; mandatory halt/replace per
protocols before spray. Pot drain secondary.
Question 2. (Single Select)
When conducting a holiday detection test, what is the ideal voltage range for a high-voltage spark test on a
coating?
A: 2,000 to 5,000 volts
B: 5,000 to 10,000 volts
C: 10,000 to 15,000 volts
D: 1,000 to 2,000 volts
Answer: B
Explanation:
The ideal voltage range for a high-voltage spark test on a coating is typically between 5,000 to 10,000
volts, as this range is effective for detecting holidays in coatings.
Question 3. (Single Select)
https://pass2certify.com//exam/ampp-cci2 Page 2 of 5
In the context of concrete repair, what does ACI 562 emphasize regarding the assessment of existing
conditions?
A: Environmental impact
B: Aesthetic considerations
C: Cost-effectiveness of repairs
D: Structural integrity and load-bearing capacity
Answer: D
Explanation:
ACI 562 emphasizes the importance of assessing structural integrity and load-bearing capacity when
evaluating existing conditions for concrete repair. This ensures that any repairs made will not compromise
the overall safety and performance of the structure.
Question 4. (Single Select)
During the inspection of a post-tensioned slab, you notice that the tendons are exposed due to concrete
spalling. What immediate action should be taken?
A: Cover the tendons with a waterproof membrane
B: Apply a sealant over the exposed tendons
C: Ignore it if the slab is performing well
D: Document the condition and schedule repairs
Answer: D
Explanation:
Documenting the condition and scheduling repairs is the immediate action that should be taken. Exposed
tendons pose a risk of corrosion and structural failure, making timely repairs essential to maintain the
integrity of the slab.
Question 5. (Single Select)
https://pass2certify.com//exam/ampp-cci2 Page 3 of 5
The specification mandates hold point approval before applying stripe coat on concrete edges and
crevices. The applicator completes striping without notification. As CCI2 inspector, your action includes:
A: Inspect retroactively and approve if visually acceptable
B: Waive as stripe coats are optional
C: Document and release for full coating
D: Issue NCR requiring exposure for verification if possible
Answer: D
Explanation:
Stripe coats on complex geometries ensure coverage in hard-to-reach areas. Skipping hold point prevents
verification of proper application, constituting non-conformance. NCR requires assessing feasibility of
non-destructive testing or partial exposure to confirm thickness and holidays, with remediation if deficient.
https://pass2certify.com//exam/ampp-cci2 Page 4 of 5
Need more info? Check the link below:
https://pass2certify.com/exam/ampp-cci2
Thanks for Being a Valued Pass2Certify User!
Guaranteed Success Pass Every Exam with Pass2Certify.
Save $15 instantly with promo code
SAVEFAST
Sales: [email protected]
Support: [email protected]
https://pass2certify.com//exam/ampp-cci2 Page 5 of 5