Arduino Pro Mini ATmega328 3.3V
                     09/06/2023, 15:47 Arduino Pro Mini ATmega328 3.3V
₹  Indian 
 Login   Register Rupee
(
https://robomart.com/   
)
 (https://robomart.com/) → Arduino Pro Mini ATmega328 3.3V (https://robomart.com/arduino-pro-mini-atmega328-3-3v)
Arduino Pro Mini ATmega328 3.3V
 13845 Views
✓IN STOCK  
SKU: 
RM000940
₹ 293.82
(inc GST)
₹ 249.00 ( + 
18.00% Gst 
Extra )
Product 
Highlights
131 Powerful Instructions – Most Single Clock Cycle 
Execution  Up to 20 MIPS Throughput at 20 MHz
Two 8-bit Timer/Counters with Separate Prescaler and Compare 
Mode  One 16-bit Timer/Counter with Separate Prescaler, 
Compare Mode, and  Capture Mode
Real Time Counter with Separate Oscillator
D E S C R IP T IO N
The Arduino Pro Mini is intended for advanced users who require flexibility, low-cost, and small size. It comes with the minimum of components (no 
on-board USB or  pin headers) to keep the cost down. Be sure to provide the correct power and use components whose operating voltage matches 
that of the board.
The board comes without built-in USB circuitry, so an off-board USB-to-TTL serial convertor must be used to upload sketches. This can be a FTDI TTL-
232R USB - TTL  Level Serial Converter Cable for the 5V Arduino Mini Pro), or a FTDI TTL-232R-3V3 USB - TTL Level Serial Converter Cable. One quick 
way to connect these is by  inserting a six-pin 0.1" male pin header into the end of the FTDI cable or breakout board, and pressing it against the six 
hole programming header on the Mini Pro. If,  however, you're going to be uploading lots of sketches to your Pro Mini, you'll probably want to solder 
some pins (male headers) to the holes.
The board can be powered through USB via the six-pin programming header, or from a regulated 5V (depending on the model) supply applied to 
the VCC pin or an  unregulated supply on the RAW pin.
Any standard 0.1" spaced header can be soldered to the holes on the Arduino Pro Mini. To use every pin requires two 12-pin headers, plus a 
six pin header for  programming, if desired. Bare wire can also be soldered directly to the holes.
ATMEGA 328 Specifications :
131 Powerful Instructions – Most Single Clock Cycle 
Execution  Up to 20 MIPS Throughput at 20 MHz
Two 8-bit Timer/Counters with Separate Prescaler and 
Compare Mode
One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and 
Capture Mode  Real Time Counter with Separate Oscillator
Six PWM Channels
8-channel 10-bit ADC in TQFP and QFN/MLF package
Programmable Watchdog Timer with Separate On-chip 
Oscillator  On-chip Analog Comparator
23 Programmable I/O Lines
Tags:  Arduino Pro (https://robomart.com/tags/Arduino (https://robomart.com/tags
 Pro) /)
R E L A T E D  P R O D U C T S
1   ADD TO CART
1/2
https://robomart.com/arduino-pro-mini-atmega328-3-3v

 