How To Fix The 79 Service Error In HP Printer In 4 Steps?
                     Printer Tales

How To Fix The 79 Service Error In HP Printer
HP is a popular brand in the technological world and is 
common as well. The printers they provide are also 
among the most commonly used printers. 
The 79 error in HP printers is also among those 
annoying errors which ruin a user's experience. It is a 
common error that occurs due to problems in the internal 
firmware, which causes the printer to restart 
automatically.
Causes Of The 79 Error In HP Printer 
Causes Of The 79 Error In HP Printer 
It is a very unpredictable error that can occur in between 
an important print job. You will see this message: 79 
Error; turn off then on, which means that you won't be 
able to proceed with the printing without fixing the issue. 
That is why it is better to understand the cause so that 
you can prevent it from occurring in the first place. 
Preventing these causes will reduce the chance of this 
error from happening. However, on the off chance that 
the error does occur, you can then move on to fixing the 
error using the methods
4 Steps to Fix HP Printer 79 Service Error
There are many ways to fix the error in HP printers 
which can occur for a number of reasons. These solutions 
are as follows: 
o Power Cycling the printer
o Firmware updates
o Clearing the Print Head
o Checking for paper jams
4 Steps to Fix HP Printer 79 Service Error
There are many ways to fix the error in HP printers 
which can occur for a number of reasons. These solutions 
are as follows: 
o Power Cycling the printer
o Firmware updates
o Clearing the Print Head
o Checking for paper jams
Power Cycling the printer
 Turn off the printer and wait for about a minute before 
turning it on. 
 Remove the surge protector (if any) and then establish 
a direct power supply by plugging the printer directly 
into the power source. 
 Then turn on the printer.
 If you still have the error message, then disconnect the 
power and USB cables from the printer. 
 When you see the printer returning to the "Ready" 
state, check the version of firmware it uses and update 
it if a new version is available.
Firmware updates
HP regularly releases firmware updates to improve the 
printer's functionality or fix the current issues. If power 
cycling does not resolve the issue, then you can go for 
updating the firmware of your HP printer to make the 
most out of it. 
There are 3 ways to update the printer: 
 Update Using HP Smart App
 Direct Update
 Download And Update From the Official HP Website
Clearing the Print Head
 Open the system, which is connected to the printer, 
and run the "Clean Print Head" function.
 If it does not work, then you can open the printer's 
cover and unplug the power cables. 
 Remove the ink cartridge from the printer and use a 
cloth to clean the contacts. 
 After cleaning the printhead contacts, put back the 
cartridges. 
 Plug in the printer's power cables again and let the 
printer boot up. 
 The printer will start up and then run a test print to 
check if the error is fixed.
Checking for paper jams
Input And Output Paper 
Trays
ADF
Checking for paper jams
Sometimes, a paper jam or paper getting stuck 
inside the printer can also lead to an error. You 
can clear the paper jam in your HP printer.
clear the jam from the exterior of the printer. 
Check if there is any paper stuck in the printing 
machinery and remove it gently. The areas where 
you can commonly see the jam include the input 
and output paper tray and ADF.
To Know More Contact Us:
Company Name – Printer Tales
Website – www.printertales.com
Official Email – [email protected]
Contact Number – 15187953523 
Address – 698 NE 1st Ave, Miami FL 
33132