Quick Solution to Install Linksys WiFi Extender Setup
                     Linksys WiFi Extender Setup
Easy Step by Step Guide
Linksys Wi-Fi Extenders
Linksys Wi-Fi extenders are among the best WiFi extenders out 
there that will help you extend the signals to each and every 
corner of the house. You might have a router in your home and 
you might be re-adjusting its location in order to get the signals. 
But that is not needed anymore as you can easily setup the 
extender and then use it. In order to 
Linksys WiFi Extender Setup, there are some steps that you are 
required to follow.
Working Of The Linksys WiFi Range Extender?
All the Linksys extenders work with the same technology, these 
extenders are going to boost the WiFi signal in order to cover all 
the dead zones. These devices are going to repeat the 
Wi-Fi signals to a higher and this is why they are called the 
Linksys Wi-Fi Range Extenders. Extenders are designed to 
work as a replicator and amplify the signals that are weak to all 
the corners of the house.
The Configuration Of The Linksys WiFi 
Extender Setup
You are going to get the extenders that have this LED on the 
front that will give you the information of the power and the Wi-
Fi Setup. If you see that the LED is blinking in the white color, 
then it means that the power is on. This could also mean the 
gradation of the firmware or the factory setting reset. Let us now 
see the steps through which you will be able to Follow The 
Process.
Linksys Wifi Extender Setup Steps
There are some ways through which you will be able to connect 
the Wifi extender to the Wi-Fi network. With this, you will also be 
able to connect other devices as well.
● Press the click buttons and then you need to wait for the Pop-Up.
● What you can do is either press or hold the Wi-Fi protected setup 
button on the Linksys router.
● Once you see that the connectivity is done, the LED of the Linksys 
Router is going to become solid.
Follow The Steps That Are Mentioned Below
● The first thing that you are required to do is to plug in the 
extender of the power plug.
● Connect the extender with the PC through the ethernet cable.
● After that, you need to type in the address bar of the web browser 
the default address for all the Linksys routers which is 
192.168.1.240.
● Then you need to login to the setup page of the Linksys range 
extender and then add your name to it. After that, you need to 
add the same SSID number from the router or the access point.
In Conclusion
If you are still not able to follow the process of Linksys Wifi extender setup 
and are looking for help. Then you can get in touch with our experts.
Toll-free Number
USA/CA: +1-888-480-0288
UK/London: +44-800-041-8324
Visit Our Website
routererrorcod.com