Preparations Required For The Installation Of EOT Cranes
                     Preparations Required For The Installation Of EOT Cranes
Unlike a number of other equipment, you would be installing in your manufacturing unit, the 
installation of the EOT cranes require adequate preparation before it is installed 
professionally. Without making the necessary preparations you should not rush to bring in the
equipment because it would result in faulty and incorrect installation of the cranes. 
Everything starts with the selection of the right type of crane for your purpose. In certain 
instances, you may need to install double girder EOT cranes and in other instance you may 
have to go with single girder cranes. If you fail to do a proper requirements analysis it is very 
easy to end up with the wrong type of EOT crane. Only when the right crane is installed you 
will be able to use it or else you would have wasted your money on the wrong type of crane 
and you also would be putting people in your facility at risk when you have a wrong EOT 
crane installed in your facility and when you try to use the crane for your industrial lifting 
requirements.
Before you could install the crane all the required support structures should be in place. When
you are planning the support structures you should not only be taking the weight of the 
equipment into consideration but you should also be taking into account the maximum load 
the equipment is likely to lift. The support structure should have the required reinforcement 
and its load bearing capacity should be tested fully. This is not an area that you would want to
work with presumptions.
In case you need to erect concrete structures to support the crane then the work should be 
completed well in advance so that the concrete structure is fully cured and is ready for use. 
All these require careful planning and you cannot handle this in a haphazard way as all these 
factors translate to safety challenges. You must talk to your cranes company to understand 
fully what type of support structure should be constructed. It is also useful to discuss the line 
of operations with your crane manufacturer so that they could guide you through the set-up 
process and with the preparation work. When your manufacturer understands clearly what 
you are trying to achieve, then they could be having a much simpler solution than what you 
have in mind. After all, they are the industry experts and they would have already worked 
with industrial lifting requirements of similar nature or with even more complex 
requirements. Take advantage of the industry experience of your crane manufacturer and 
have the most appropriate crane installed in your facility. Moreover, ensure all the required 
preparation work is handled correctly and is completed in good time so that your crane 
manufacturer could install the crane without running into any glitches or delays. To save 
yourself from all possible troubles down the line select your crane manufacture with utmost 
care and get things done in the most professional way possible.