Microtek Solar Batteries: A Sustainable Solution for Homeowners
                     Introducing
Tall Tubular Battery 
with
Longer 
Power Backup
POSITIONIN
G01 Tall Tubular Battery with longer power backup
02 Hassel Free  Onsite Service
03 AMP Technology for Longer Life
AMP Advanced 
Microparticles for 
Longer Life 
Technology developed through cutting-edge research and development which uses 
‘Super Alloy and Binder Additives’ for providing Core Active Material, a high 
degree of strength and longevity due to which, it withstands uses in harsh conditions 
without degrading for longer period of life.
PRODUCT FEATURES
99.98% Pure Ultra Low Maintenance
Lead
More Power Backup Tall Tubular Battery
TALL TUBULAR BATTERY RANGE
MS2006024TT  
NEW
MS1503624TT  
NEW
MS1506024TT  
NEW
Model Name MS2006024TT  
NEW
 Warranty – 84 
Months
 60 months free of 
cost + 24 months 
pro-rata
 200 Ah
Model Name MS1503624TT  
NEW
 Warranty – 84 
Months
 60 months free of 
cost + 24 months 
pro-rata
 150 Ah
Model Name MS1506024TT  
NEW
 Warranty – 84 
Months
 60 months free of 
cost + 24 months 
pro-rata
 150 Ah
All Solar Battery SKUs
  MMiocdroetle k   Capacity   Capacity   Total   Flat   Pro rata   Container 
Name   (A
 h  at   (
  
C10) C
A2h0 )at Warr  anty  War r anty Warr  anty Ty p e    
  MS2N00E6W024TT 200   2  25    8 4    6 0     
2 4    T T
  MS15N0E3W624TT  150   1  65    6 0    3 6      
2 4    T T
  MS1N50E6W024TT 150   1  70    8 4    6 0    2 4    T T
Battery Care 
Tips
Battery top should always be kept clean and dry. Always use a moist cotton cloth only. Never use a wollen/ 
silk or synthetic cloth, as it can create a spark.
Apply Petroleum jelly over the terminals and cable clamps to avoid corrosion. Never apply grease. 
Terminal corrosion. Dirt and moisture cause loss of power and make battery weak.
The electrolyte level should not be below the minimum level mark during installing or during topping up. Use 
only battery grade distilled water for topping up. Do not top  up with acid/ electrolyte/ mineral water or tap water.
 The cells lose water during use. Check your battery regularly and maintain the electrolyte level within the 
band marks indicated on the stem of the level indicator.
Match charging parameters to battery.
Components of Lead Acid 
Battery
1 2 3 4
Positive Plate Negative Plate Electrolyte Separator
Porous Mass of Lead Porous Mass of Spongy Dilute Sulphuric Acid Micro Porous, Acid 
Dioxide (Pbo2) as Positive Lead (Pb) as Negative (H2SO4) Resistant Electrical 
Active material colour- Active material colour – insulator between Pos. & 
chocolate or dark brown. smoke grey or cement Neg. Plates
5 6 7 8
Container Cover Filling & Vent Plugs Gang Piece Manifold
Polypropylene Casing to To seal the battery To facilitate filling of To vent gases through 
house the Plate group & container electrolytes and water common manifold and 
electrolyte topping up & & venting exhaustnozzle
the gases
9 1 1 1
0 1 2
Terminals Inter cell Poles Exhaust Tube Exhaust Seal Cap
To make connections To connect the cells in To discharge the vent To protect the dry 
to the electrical loads series internally gases charged plates from 
oxidation
Service 
ECusxtomcere Calrel Neumnberc: e
72 83 83 83 
83
Toll Free Quick Customer
Helpline Response Friendly
On-site Qualified Van
Service Engineers Service
*Helpdesk language support: Hindi, English, Bengali, Tamil and Punjabi.