Smooth, Strong, Stunning: The Resin Driveway Advantage
                     Smooth, Strong, Stunning: The 
Resin Driveway Advantage
There are several hard-surfacing methods available on 
the market, such as imprinted concrete, Bitmac, and 
concrete-to-block paving. But resin-bound 
driveways in Kent are unique. No other surfacing 
system can match the range of strengths, resistances, 
and structural and aesthetic benefits that this one offers.
 Flexibility in Design
Your resin-bound system is a beautiful alternative to 
concrete, tarmac, or asphalt since it can be moulded into 
any shape you may imagine for your surface. The wide 
range of hues and blends allows you to mix and enjoy a 
multitude of design options.
Smaller aggregate sizes (such as 1-3mm) can be used to 
fill in the 2–5mm gaps between the stones to improve 
appearance or strength. Water can enter the sub-base 
through porous resin-bound surfaces. A resin system is 
SUDS compliant as long as the sub-base is also 
permeable and SUDS compliant.
 Durable
The resin-bound aggregate structure is incredibly durable and strong, and it will remain so for many 
years. Its excellent resistance to weeds and organic impurities, low care requirements, and ease of 
cleaning make this possible.
 Simple to Maintain
The resin essentially adheres to the old surface and glues the new surface finish in place. The resin-
bound surface is weed-resistant and requires minimal maintenance if properly cared for. Better resin 
systems keep a consistent tint and are resistant to oil and petrol spills because of their UV resistance.
 Flat and Silky
Unlike loose gravel or stones that are linked to resin, a resin surface is smooth, flat, and seamless. The 
way glue and particles are mixed before being troweled is the cause of this. Parking and vehicle and 
pedestrian traffic are ideal on this surface.
 Simple to Clean
A resin-bound system is easy to clean. Most stains, filth, and other cleaning jobs can be handled with 
a simple jet wash.
 Cost-effective
Although resin is typically more expensive than other driveway materials, it is typically the more 
cost-effective choice. This is because, despite typically costing more to install, it is likely to last a lot 
longer than other driveway materials and requires less upkeep. Concrete or Bitmac driveways may 
need to be replaced sooner rather than later, which may increase your expenses.
 Low upkeep
The fact that resin driveways in Kent are so simple to maintain has satisfied a lot of people. This 
implies that you can maintain your driveway in excellent condition with little work. You will need to 
use a stiff brush to sweep the resin surface regularly to remove debris such as leaves, dirt, and 
sand. It's also advised to sometimes rinse the resin with clean water. For resin-bound surfacing, 
brushing and washing are frequently the only care required.
Contact Us
Address:- Base Driveways 10 Balas Drive, Sittingbourne, 
Kent, ME10 5BA
Email Id:- [email protected]
Contact Number:- 01795 423264/ 
07971 276696
Website:- https://www.basedriveways.co.uk/