Common Mistakes to be Avoid in Embroidery Digitizing
                     Common Mistakes to be Avoid in Embroidery Digitizing 
If you look at the embroidery industry, you will note that thousands of 
digitizers are used to complete tasks. However, the result is always not perfect 
because of the mistakes made while digitizing the embroidery. Here is a list of 
mistakes that people make when they are engaged with embroidery digitizing. 
Lack of pathing 
This issue occurs when the embroidery digitizers are not able to draw a design 
that looks similar on the screen. The machine would jump unduly, which would 
not make it follow the correct path. Or else, too many trims can be seen in the 
outcome. 
Lack of planning 
Before starting to digitize embroidery, it is important to have a proper planning 
session. It is then possible to figure out how to proceed with the digitization of 
the embroidery, without causing any mistakes. It can help all people to end up 
with very effective results, too. 
Using the wrong style 
Using the wrong style can be another common mistake that people make 
when they are engaged in digitizing embroidery. This can be considered one of 
the most difficult things to learn. However, it is important to spend time and 
figure out what underlays would be ideal for stitch types. 
Using no underlay 
Some individuals who are engaged in digitizing embroidery do not use 
underlays or use incorrect underlays. This could distort the entire design. As a 
result, you will be created with a nightmare when you are engaged in the 
embroidery process. This can help you stay away from trouble, especially when 
you are using multiple types of fabric. 
Improper compensation 
All people who are engaged in digitizing embroidery should have a clear 
understanding of it. In other words, you need to understand what is too little 
and what is too much. If you do not focus on this, you will end up with a 
digitizing embroidery design that will end up with an underlay that sticks out 
and does not fit perfectly into the design. 
Not using proper density 
New embroidery digitizers can supply a bullet proof design. As a result, at 
times the density would be too high, while at other times it would be too low. 
This is one of the biggest mistakes made with digitizing embroidery, and you 
will need to take the right steps to get rid of this issue. 
Following the incorrect stitch direction 
The stitch direction can create a tremendous impact on the outcome that you 
are going to get out of digitizing your embroidery. It is therefore important for 
you to follow the correct stitch direction. Failing to follow the correct stitch 
direction can have an impact on the stitch angle and the overall design of the 
embroidery. 
Not locking the stitches 
When it comes to digitizing embroidery, lock stitches are optional. As a result, 
many people are ignoring it. Unfortunately, this can have a negative impact on 
the outcome. You should pay special attention to lock stitching, especially 
while working on jersey or jacket materials. 
Not using the proper fill type 
It has also been identified that many digitizers do not have a clear idea of fill 
types. This can also have an impact on the design of the embroidery. To 
overcome this mistake, you will need to understand what types of fills are 
available. With that understanding, you can go ahead with the best fill type, 
depending on the situation. 
Read Our Blog: Embroidery Digitizer and Embroidery Digitizing Services in USA