What are the Tips and Tricks for Machine Embroidery Digitizing Guide 2021
                     What are the Tips and Tricks for Machine Embroidery 
Digitizing? Guide 2021 
Embroidery Digitizing is a field where continuous creativity and experimental 
mind are essential in addition to studying as a course or reading the books of 
professionals. Here are some of the pro tips and tricks of embroidery digitizing. 
 
Shortcomings of Auto Digitizing: 
Though the software you use can auto digitize, the computer cannot think as 
you can. Right! The computer cannot even support some decisions. For 
example, if there is a red color Coffee Mug placed in front of a red rose garden, 
then the computer cannot think Mug is different from rose and assigns the 
same color thread and stitch angle. But you are a smartie, and you would want 
to differentiate the object and background color. Therefore, you can make a 
better design with different thread colors, stitch types, and angles. 
Pros of using Auto Digitizing: 
Sometimes, auto digitizing can save your time a lot while doing custom 
embroidery digitizing. Creating a great design into multiple blocks can help 
auto digitizing look better and more accessible than creating the stitches 
manually. Using auto digitizing in the right place can be a great time saver. 
Multiple Stitch Angle: 
The angle of stitching is the essence of Embroidery Digitizing Service. Just 
imagine that you have a cartoon picture for digitizing. Think of filling the same-
colored thread in a particular angle, or filling the stitches for each section in a 
different angle would look nice? Of course, the other angle will give a realistic 
view and an exciting look for the design. Another use of using different angles 
is minimizing the pull issues when sewing out. 
Underlay stitching: 
Underlay is the preliminary stitching is sewed infill with low density before 
stitching the central embroidery. For any variety or embroidery, it is wise to 
start with an overlay. The underlay helps to make an embroidery design on any 
fabric since it tamps the thread of material and does not allow it to pop 
through the stitching. Another benefit of overlay stitching is to avoid puckering 
and thread pulling when embroidery is done for a larger area. The final stitch 
will not pucker if the overlay had no puckering when stitched. 
Outline: 
While filling a design using fill stitch, it is better to outline, making your design 
stand out and eye-catching. A running stitch with multiple overlapping or a 
satin stitch will make the design look better. 
Digitizing layers from back to front: 
You are planning your design before starting your design work will strategically 
guide where to create the design. Beginning the farthest background design 
gives a good effect. Then comes the filling, and then the outlines can be given. 
If you need not make the machine to fill the stitches, select a different shape 
with different colors and go back to the first shape and do the outline. In the 
case of a single needle machine, unnecessary thread color change can be 
avoided. 
Jump Stitches: 
In custom embroidery digitizing, some machines can cut out trim the jump 
stitches. However, most of the devices do not do such works. Long jump 
stitches can pull the design, so it is always better to keep the jump stitches as 
short as possible. 
If you want a perfect finish in embroidery digitizing without a jump stitch, you 
can hide it completely. Try finding hidden paths, especially walking from one 
section to another, which eliminates jumps or trims. 
Increase Pull Compensation: 
To control the width of stitching in embroidery digitizing, setting the proper 
pull compensation is essential. Stitches may pull away from the edges of the 
embroidered design; in such cases, increasing the pull compensation will fix 
the problem. When the fabric is thicker or working on letter embroidery styles, 
pull, payment must be risen to get a good stroke. 
Not Too wide Satin Stitch: 
Some digitizing the software has the ability where the required shape fill with 
satin stitch or a step stitch can be chosen. When a satin stitch is used for 
lettering, it can cover the entire span of the width of the letter where it is very 
narrow. But if a satin stitch is used to fill a big area, it usually becomes a long 
stitch, and the stitches become loose and snaggy. 
 
Stitch Density: 
Standard Stitch density in embroidery digitizing is usually about 0.4 to 0.45. 
The Stitch density defines the stitches per area. The lower the density, the 
higher the stitch density number. If you wanted to have more coverage on 
fabrics, increase the thickness a little higher than average. 
Overlap Elements: 
Overlapping blocks or designs will give a more natural look. So, while two 
shapes are designed nearby, digitize to overlap a bit. Conversely, for a more 
significant overlap, it is better to leave the overlapping area without filling. 
Then color that should be displayed shall be filled in the gap. This will save time 
from removing the overlapped stitching where it is not necessary. 
More than these tips, experimenting yourself is more important, and 
whenever possible, learn from the experts for continuous improvement in your 
Embroidery Digitizing Service.