Benefits of applying insulation in your house and types of insulation-insulationmachines.net
                     Benefits of applying insulation 
in your house and types of 
insulation?-
insulationmachines.net 
 
An insulation blower is a machine which helps you in carrying out blown-in insulation at 
your home and commercial premises. With the help of a blower machine, you can quickly 
fill in the gaps between the walls. Fibreglass insulation and cellulose insulation are two 
types of blown-in insulation technique where you can use any of the above to insulate 
your space optimally. An insulation machine consists of a hopper, remote controls, a 
motor etc. Airlock and can blades be placed inside the hopper for breaking the insulation 
into smaller pieces and later transferring them to vacuum hose through the airlock. In an 
insulation machine sufficient controls are provided in the remote switch so that you can 
operate the machine even if you are at a distance from it which enables you to operate 
the vacuum hose and control systems of the machine both at the same time. 
 
 
 
The agitator arm inside the hopper of the insulation blowing machine breaks apart the 
insulation and it pushes the insulation into a lower chamber called the airlock and this is 
where you want the broken pieces of insulation to go. If this airlock chamber is wide open 
and all that insulation is falling down there you can quite often wind up clogging the hose 
or clawing in the airlock that will slow you down after a point of time. This is why the fins 
of the fan blade must be edgy enough so that it is tight enough to restrict insulation from 
falling down. Also, you can place a plate above the chamber for avoiding falling insulation 
into the airlock chamber. An insulation hose reel allows you to extend the hose 
anywhere you want and it can be made of plastic, metal etc. These hose reels allow you 
to gently tie the vacuum hoses without any kinks and twists avoiding damages to the 
vacuum hoses. 
 
 
 
Spray foam insulation provides a unique monolithic thermal insulation without junctures 
and gaps. It does not allow heat transfer and optimally reduces the energy cost of houses 
and buildings just like it's equivalent heat and sound insulation materials it does not 
require any mechanical fastening such as nails, screws, screw anchors etc. It is one of 
the fastest and easy ways of applying insulation materials to fill in the gaps between a 
wall and attics. Anyone regardless of being amateur or professional can apply this form 
of insulation.