Cold Rolled Sheet Price Chart, Trend, Index, News, Demand and Forecast
                     Cold Rolled Sheet Price Chart Analysis [North America, APAC, Europe] – Q2 2025
The Cold Rolled Sheet (CRS) market experienced varied movements across key regions 
in Q2 2025, reflecting a mix of demand-supply dynamics, regional production trends, 
and downstream industrial activity. This article provides a comprehensive analysis of 
CRS price trends in North America, APAC, and Europe, highlighting market drivers, 
regional differences, and sectoral implications.
1. Overview of Cold Rolled Sheet Market
Cold Rolled Sheets are essential flat steel products used widely in automotive, 
engineering, appliance, and construction sectors. CRS is manufactured by passing 
hot-rolled steel through rollers at room temperature, improving surface finish, strength, 
and dimensional accuracy.
Price dynamics in CRS are influenced by:
 Raw material costs (hot-rolled coil prices, scrap steel, alloying elements)
 Domestic and export demand
 Production capacity and regional supply
 Inventory levels at distributors and end-users
Understanding Cold Rolled Sheet Price Charts enables stakeholders, from mill 
operators to traders, to gauge market health and forecast price trends.
2.  Cold Rolled Sheet Price Trends in North America
1. Quarter-over-Quarter Analysis
In Q2 2025, the Cold Rolled Sheet Price Index in the USA slightly decreased quarter-
over- quarter. The minor decline was attributed to two primary factors:
1. Moderate Destocking Activity – Distributors and end-users reduced inventory 
levels accumulated during previous quarters. Reduced stock led to a lower 
transactional volume, applying mild downward pressure on prices.
2. Flat Automotive Demand – The automotive sector, historically the largest 
consumer of CRS, showed stable but subdued production levels. While EV 
adoption continues to grow, traditional internal combustion engine (ICE) vehicle 
production did not pick up, limiting CRS consumption.
Get Real time Prices for Cold Rolled Sheet: https://www.chemanalyst.com/Pricing- 
data/cold-rolled-sheet-1581
Despite these pressures, prices did not collapse, indicating that the market retained 
balance between supply and demand.
2. Market Drivers
 Tariff and Trade Policies: North America continues to witness protective tariffs 
on imported steel, supporting domestic producers and preventing steep price 
falls.
 Production Stability: CRS production facilities across the U.S., particularly in 
states like Ohio and Indiana, maintained steady operations, ensuring consistent 
supply.
 Downstream Consumption Patterns: Appliance manufacturing
remained moderate, while construction activity provided limited but steady CRS 
demand.
3.  Cold Rolled Sheet Price Trends in APAC
3.1 Quarter-over-Quarter Analysis
The Cold Rolled Sheet Price Index in Malaysia dropped sharply by 14% quarter-
over- quarter in Q2 2025. This significant decline reflects multiple factors:
 Oversupply from Regional Producers: Malaysia, along with neighboring APAC 
countries like Thailand and Vietnam, saw production volumes exceed domestic 
demand, creating a surplus in the market.
 Weak Export Market Demand: Key export destinations experienced slowing 
demand for CRS, reducing orders from Malaysian producers.
 Competitive Pricing Pressure: With abundant supply in the region, suppliers had 
to reduce prices to maintain sales, impacting overall price levels.
3.2 Market Drivers
 Downstream Sector Weakness: Automotive, construction, and
appliance manufacturing slowed, particularly in countries importing Malaysian 
CRS.
 Raw Material Price Adjustments: The global hot-rolled coil prices slightly 
softened, translating into lower CRS production costs but also lower selling 
prices.
 Exchange Rate Fluctuations: Currency appreciation in Malaysia mildly affected 
export competitiveness, further constraining pricing power.
3.3 Implications for Stakeholders
For distributors and buyers in APAC, the Q2 2025 price drop provides cost advantages 
for procurement but increases pressure on domestic producers’ margins. Export-oriented 
mills are particularly vulnerable to price competition from regional rivals.
4.  Cold Rolled Sheet Price Trends in Europe
1. Quarter-over-Quarter Analysis
In Europe, the Cold Rolled Sheet Price Index in Germany recorded a slight increase in 
Q2 2025. Key contributing factors include:
 Steady Automotive Intake: Germany’s automotive sector continued moderate 
production, driving consistent CRS demand. EV and ICE production supported 
stable orders.
 Engineering and Machinery Applications: CRS remains a core material for 
machinery, appliances, and industrial equipment. Continued investment in 
engineering applications provided price support.
 Balanced Supply: German producers maintained controlled output, 
preventing oversupply and maintaining price levels.
2. Market Drivers
 Domestic Demand Strength: While other regions faced oversupply, Germany’s 
domestic demand remained relatively stable.
 Import and Export Flows: CRS imports from APAC were moderated due to 
transportation costs and competitive European pricing, supporting local 
producers.
 Sustainable Production Practices: EU steelmakers increasingly emphasize 
environmental standards, limiting excess production and positively influencing 
prices.
5. Regional Comparison and Analysis
Q2 2025 Price
Region Key Drivers
Trend
Moderate destocking, flat automotive demand,
North America Slight decrease
protective tariffs
Oversupply, weak downstream demand, export 
APAC (Malaysia) -14% market
slowdown
Europe Steady automotive and engineering demand, 
Slight increase
(Germany) controlled
supply
From the table, it is clear that regional factors significantly influence CRS price 
movements. While North America experienced mild softness, APAC saw sharp 
declines, and Europe maintained modest growth due to stable industrial activity.
6.  Factors Affecting Cold Rolled Sheet Prices
1. Raw Material Costs
CRS production relies heavily on hot-rolled coils and scrap steel. Any fluctuations in 
these inputs directly affect CRS pricing:
 Hot-Rolled Coil Prices: An increase in HRC prices often triggers CRS price 
hikes, while HRC price softening leads to reduced CRS values.
 Alloying Elements: Specialty CRS grades, which use higher alloy content, are 
particularly sensitive to raw material cost variations.
2. Downstream Demand
Automotive, appliance, construction, and machinery sectors are key CRS consumers. 
Changes in production schedules, technological transitions (e.g., EVs), and 
macroeconomic conditions impact CRS demand and pricing.
3. Inventory and Stock Levels
Distributor and end-user inventory strategies can create short-term price volatility:
 High Stock Levels: Excess inventory typically reduces market urgency, pressuring 
prices downward.
 Low Stock Levels: Limited inventory can tighten supply, supporting prices.
6.4 Trade Policies and Import Tariffs
Protective tariffs in North America and EU regulations often support domestic CRS 
pricing. Conversely, free trade agreements and export incentives in APAC can create 
downward price pressure.
  ÷  Track real time Cold Rolled Sheet and market trends on 
ChemAnalyst: https://www.chemanalyst.com/ChemAnalyst/PricingForm?Product=C 
old%20Rolled%20Sheet
7.  Outlook for Cold Rolled Sheet Prices
1. North America
 Expect mild price stability with minor fluctuations based on downstream 
automotive trends.
 Protective tariffs and domestic mill capacity will continue to support baseline 
prices.
2. APAC
 Price corrections may continue in Q3 2025 as oversupply persists.
 Mills may seek to balance production with domestic and export demand to 
prevent further declines.
3. Europe
 CRS prices are likely to maintain modest growth, supported by stable 
industrial consumption.
 Environmental and production standards may limit excess output, providing 
price support.
8.  Cold Rolled Sheet Price Chart Analysis
A Cold Rolled Sheet Price Chart provides a visual overview of historical price 
trends, helping market participants identify patterns:
North America: Gradual decline in Q2 2025, showing minor volatility due to 
automotive sector weakness.
APAC: Sharp downward trend, reflecting oversupply and weak export demand. 
Europe: Slight upward movement, consistent with stable intake from automotive and 
engineering sectors.
Visual charts allow traders, procurement teams, and analysts to:
 Compare price trends across regions
 Forecast short-term and long-term price movements
 Identify investment or procurement opportunities
9. Conclusion
The Q2 2025 Cold Rolled Sheet market exhibited regional divergence:
 North America experienced mild price declines due to moderate destocking and 
flat automotive demand.
 APAC faced a sharp 14% drop in Malaysia, driven by oversupply and weak 
export markets.
 Europe saw slight price increases in Germany, underpinned by stable 
automotive and engineering demand.
Understanding Cold Rolled Sheet Price Charts is critical for market participants to 
navigate regional differences, manage inventory, and optimize procurement strategies. 
With raw material trends, trade policies, and downstream demand continuously 
evolving, CRS pricing will remain sensitive to both domestic and global market forces 
in the coming quarters.
Contact Us: 
ChemAnalyst
GmbH - S-01, 2.floor, Subbelrather 
Straße, 15a Cologne, 50823, Germany
Call: +49-221-6505-8833
Email: [email protected] 
Website: https://www.chemanalyst.com/