Scissor Lift-Industrial Scissor Lift-Twin Scissor Lift-Chennai-Bangalore-Hyderabad-Coimbatore-Madurai
                     SCISSOR LIFT 
MANUFACTURERS
How to Safely Use a Scissor Lift
Most of the work involved in making sure you and your unit are safe 
while using a scissor lift happens long before anyone steps foot onto 
the equipment. Scissor lift safety preparation drop into four key 
categories:
Environment
It’s impossible to work a scissor lift safely unless the nearby area is 
safe. Assess the worksite beforehand and identify all possible risks, 
like nearby power lines or rough ground.
Protective Controls
Like all heavy equipment, a scissor lift comes equipped with an 
emergency stop button that will shut down all purpose immediately in 
case of an emergency. 
How does a hydraulic scissor lift work? 
There are a few core elements that make up the 
structure of a hydraulic scissor lift unit. The base 
at the bottom of the lift offers a stable base for the 
lift during operation. Typically, one to three 
hydraulic cylinders power the scissor legs to move 
vertically upwards or downwards. 
The power source or engine provides the energy 
for this process. A platform at the top is connected 
to the scissor legs and carries the load on the unit. 
The top platform of the scissor lift remains 
horizontal to the ground as it rises from rest to the 
raised position secure equipment or workers on 
the lift remain level and balanced as it moves 
between different heights. 
Scissor Lift Working Instructions:
One of the most important parts of scissor lift training is  
knowing what to before starting a job. This handle to both new 
and experienced scissor lift workers. Before raising the lift to 
begin work, operators should always:
Check the work site to ensure there are no visible risks. These 
contain of drop-offs, holes, bumps, debris, and other people 
around the work site.
Inspect the lift. This includes checking all operational and 
functional elements with the power off and then with the power 
on.
Make sure all safety equipment is in place, including the fender.
Make sure anyone working on the lift damages the right clothing. 
This includes hard hats, rubber-soled shoes, and gauntlet.
How to Move a Scissor Lift
The surface on which the scaffold is being carried is within three 
degrees of level. It must also be free of pits, holes and other
An experienced person must be on-site to supervise the advance
If utilized, coracle frames should be installed on both sides of the 
lift.
Scissor Lift Manufacturers - What to Look 
For?
Scissor lift manufacturers have become 
specialized in the design and manufacture of a 
different of lifting solutions. Automotive 
scissor lift manufacturers design lifts for use 
primarily in the automobile industry. Many 
scissor lift manufacturers focus on the design 
and manufacture of products suitable for inside 
applications.
What are scissor lifts and how are these utilized in 
construction projects?
Scissor lift is a kind of construction lift that is equipped with 
machinery and a platform that can lift workers as well as heavy 
loads to elevated areas. Basically, these can lift workforce and 
tools to spaces high above the ground.
This type of equipment is very useful to have on a construction 
site. These can offer a study enclosure and an elevated platform 
that can help workers carry out projects accurately at high 
elevations, whether it comes to cable wiring or close survey. 
There are difference in scissor lifts, when it comes to type of fuel 
used, application and size.
HYDRAULIC SCISSOR LIFTS
Hydraulic scissor lifts can be utilized inside and 
outside and controlled by either an electric 
engine or packed air. From one chamber to 
another, the hydraulic fluid is pushed or 
depleted, permitting the scissor lift to raise or 
drop depending on the situation. Warehouses, 
construction site, and framework projects are 
great spots to utilize hydraulic scissor lifts. The 
scissor lift operator turns on the power supply. 
The operator delivers the water driven liquid or 
diminishes the pneumatic tension level in the 
chamber by returning it to the repository to 
bring down the scissor lift component, causing 
the scissor legs to withdraw.
THANK 
YOU