Electrical Product Testing Laboratory
                     URS PRODUCTS & TESTING PVT. LIMITED 
Electrical Product 
Testing Laboratory
F-3, Sector 6 , Noida (India),  Call: +91 99713 00904
Mail:  [email protected]    Web: www.urs-labs.com
URS PRODUCTS & TESTING PVT. LIMITED 
URS Labs is a leader in Electrical Product testing across 
India. A highly qualified engineer tests your product and 
suggests the product so that you can market it. High Voltage 
Lightning Impulse (upto 400 kVp ) & Power Frequency  (dry & 
wet)Testing (up to 300 kVrms ) Withstand & Flashover of 
Insulators, Switches, Isolators, Circuit Breakers etc. Applicable 
Standard: IS:1293, IS:3854, IS:302-2-2, IS 302-2-6, IS 302-2-8
URS PRODUCTS & TESTING PVT. LIMITED 
URS PRODUCTS & TESTING PVT. LIMITED 
ELECTRICAL PRODUCTS STANDARDS
• IS:16242
• IS:3854
• IS:1293
• IS:13450-1-2
• IEC 60601-1-2
• IS:302-2-2
• IS 302-2-6
• IS 302-2-8
URS PRODUCTS & TESTING PVT. LIMITED 
ELECTRICAL HOUSE-HOLD STANDARDS
• IS:2082
• IS:8978
• IS-302-2-30
• IS:4283
• IS:996
• IS:302-2-201
• IS:366
• IS:369
• IS:302-1
URS PRODUCTS & TESTING PVT. LIMITED 
OUR PRODUCT TESTING SERVICES
• IT PRODUCTS             • Cold Test • Aging Testing (Life 
                                  • Dry Heat Test Test)
                                  
   • Salt Spray Testing
• Safety Testing
• Electrical Products • Vibration Testing
• Function Testing
• Luminaries Products • Ingress Protection 
• Endurance Testing
Rating IP Testing • Audio Video 
• Batteries/Cells 
Products • Impulse and Surge 
Products
Testing • CE Marking
• Automotive 
components • Low Voltage 
Directive
• EMI EMC TESTING
• Machinery Directive
• Environmental 
Testing
URS PRODUCTS & TESTING PVT. LIMITED 
WHAT IS THE RISK OF  INJURY?
Injury can occur when live electrical parts are  exposed and can be touched, or 
when metalwork  which is meant to be earthed becomes live at a  dangerous 
voltage. The likelihood of touching  live parts is increased during electrical testing 
and  fault-finding, when conductors at dangerous  voltages are often exposed. 
This risk can be  minimized if testing is done while the equipment  is isolated 
from any dangerous source of supply,  although this cannot always be done, and 
care  must also be taken to prevent contact with any  hazardous internally 
produced voltages.
URS PRODUCTS & TESTING PVT. LIMITED 
FURTHER INFORMATION
F-3, SECTOR 6 , NOIDA (INDIA)
CALL: +91 99713 00904
[email protected]
WWW.URS-LABS.COM