How to Use Man Baskets Safely with Cranes
                     HOW TO USE MAN BASKETS SAFELY WITH CRANES  
                    INTRODUCTION
 
Using a man basket with a crane can provide access to elevated or difficult-to-
reach work areas when conventional access methods are not practical. However, 
lifting people requires greater care than lifting ordinary materials. Proper planning, 
suitable equipment, trained workers, and strict safety procedures are essential to 
reduce the risk of falls, swinging, tipping, or equipment failure.
DETERMINE WHETHER A MAN 
BASKET IS NECESSARY  
Before using a crane to lift workers, assess whether safer alternatives such as 
scaffolding, ladders, aerial work platforms, or personnel hoists can be used. 
Crane-suspended personnel platforms should generally be considered only when 
conventional methods are not feasible or would create a greater hazard.
Once you select a man basket, check the manufacturer's instructions, rated 
capacity, site conditions, and applicable safety regulations. Everyone involved 
should understand their responsibilities before the lifting operation begins.
INSPECT THE CRANE AND 
EQUIPMENT  
Inspect the crane, hooks, wire ropes, rigging, and 
man basket before use. The crane should be 
positioned on firm, stable ground and properly 
levelled. Outriggers and stabilisers should be used 
according to the manufacturer's instructions.
Your construction material handling equipment 
should be suitable for the lifting application and 
rated for the intended load. Never exceed the 
crane or platform's rated capacity.
                 CHECK CONNECTIONS AND RIGGING  
 
The connection between the crane and personnel platform is critical. Check that 
all attachment points, hooks, shackles, and rigging components are correctly 
secured and suitable for personnel lifting.
Before workers enter the platform, conduct a trial lift. Raise the empty or 
appropriately prepared basket a short distance and check its balance, stability, 
rigging, and clearance. This allows you to identify potential problems before 
people are exposed to the hazards.
            USE APPROPRIATE FALL PROTECTION  
Workers inside the basket should use the 
required fall protection system and connect 
it to an approved anchorage point. Keep 
gates secured and avoid leaning over or 
climbing on the guardrails to gain 
additional height.
A rescue man basket may be designed 
for specific rescue or access applications, 
but you should not assume that every 
rescue cage is suitable for crane lifting.
USE EQUIPMENT ONLY AS INTENDED  
Different personnel platforms are designed for different types of lifting 
equipment. A forklift man basket should only be used with compatible 
equipment and in accordance with its manufacturer's instructions.
Do not modify a personnel platform, use makeshift attachments, or connect 
equipment in a way that has not been approved by the manufacturer. 
                    CONCLUSION
 
Using a man basket safely requires careful planning, suitable equipment, secure 
connections, fall protection, clear communication, and competent personnel. You 
should always follow the manufacturer's instructions and applicable workplace 
safety requirements. Selecting the right 
construction material handling equipment for each task can further support a 
safer and more controlled worksite.Regular training and thorough pre-use 
inspections can also help prevent accidents and protect everyone involved in the 
lifting operation.
THANK YOU