Get Rid of Conveyor Belt Maintenance Issues
                     Get Rid of Conveyor Belt Maintenance Issues-- Asphalt 
Plants. 
 
The proper functioning of conveyor belts maintenance are very 
important to smooth operation of asphalt batching plant or 
concrete mixers. Conveyor belts should be maintained along with 
the frame holding the conveyor belt. The operator or maintenance 
personnel should be well versed with the basic maintenance of 
conveyor belt and its entire frame. Heat-resistant conveyor belt 
on Atlas double drum asphalt plant. The maintenance personnel 
should regularly walk around both the sides of the system. And 
note the physical condition of the conveyor. Any unusual behavior 
of moving components must be taken note. Any material getting 
stuck has to be noted. Signs of misalignment or improper belt 
tracking have to be noted. Drive amperage requirements has to be 
checked. The same thing has to be compared to previous levels for 
similar loads and conditions or adjusted to the manufacturers 
standard. 
Few things that the operator can take care of are: Some few 
things that asphalt plant operator is very take care. 
 
Image:- Asphalt Plant manufacturer - ALL Tech Group  
- Only authorized personnel are allowed to operate the conveyor. 
 - Operator should not run the conveyor when the motor guards are 
in position. 
- Before removing the material stuck, the conveyor should be 
stopped. 
- Anybody wearing looses clothes should not be allowed to go near 
the conveyor belts. 
- Good housekeeping practice should be maintained near the 
conveyor for smooth operation. 
 - Lubricants, fuel or any spilled materials should be cleaned 
immediately. 
- Any sharp object getting stuck in the conveyor should be 
immediately removed. 
- Preventing off center belt loading of materials into the 
conveyor. - Repairing or correcting any faults promptly to 
aggravate the problem further. 
- It is important to check the loading point and transfer point 
spillage. 
- To obtain maximum output from the conveyors, the operators can 
take care and maintain: drives, take up system, belt, pulleys, 
idler rollers, return rollers, head and tail rollers, pedestals, 
scrappers, guards, conveyor covers, walkway, control panel 
operating conveyor belt. 
Conveyor belt inspection should involve: 
- Belt conveyor alignment 
- Removal of foreign object 
- Maintaining the structure of the conveyor belt 
- Removing the lubrication or fuel spillage from the conveyor 
belt 
- Setting the scrapper 
- Making sure that the material flow is not off center If 
present, 
- Adjusting the skirt boards. 
- Checking for wear on top and bottom of the conveyor belt. 
- Checking the belt for any cracks due to heat 
- Checking the tension of the belt to avoid excessive stretch. 
Conveyor belt maintenance plays an important role in any 
construction machinery. The proper functioning of conveyor belts 
maintenance are very important to smooth operation of asphalt 
mixing plant or concrete mixers. Conveyor belts should be 
maintained along with the frame holding the conveyor belt. The 
operator or maintenance personnel should be well versed with the 
basic maintenance of conveyor belt and its entire frame. Good 
housekeeping is the key to longer conveyor belt. Check what is 
asphalt plant? and How does asphalt plant works? Here.