Electronics & Controllers - Andantex
                     E L E C T R O N I C S  
&   
By : Andantex USA INC. | www.andantex.
Ccom O N T R O L L E R S
OVERVIEW
Merobel DINrail mounting
electronics for  transducer
ampli fication, current regulated  
power supplies and web tension
controller.
AMPLIBLOC
K
OVERVIEW
AMPLI-Block is a load cell/transducer amplifier. 
AMPLI-  Block offers many benefits in a compact 
design such as  very easy set up and two 
outputs (one with adjustable  filter). AMPLI-
Block may be used with one or two load  cells or 
transducers. It also features wide amplification  
range (gain from 20 to 5,000) and the capability 
to  amplify either strain gage signal 2mV/V or  
semiconductor gage signal 50 mV/V.
www.andantex.com
AMPLIBLOC
KFEATURES
Input voltage: 24 AC/DC
Output voltage: 0 to 10 DC (4 – 20 
mA as an  option)
Zero compensation: +/-50% 
of FST  Emperature range: -10 
to 40°C  Accuracy: better 
than 1%
www.andantex.com
POWER 
BLOCKS
OVERVIEW
The most comprehensive range of current 
regulated  Power Supply units for electric 
brakes and clutches  (EMP, hysteresis, etc.) 
based on microcontroller  technology. Accurate 
current output control,  independent of coil 
temperature. High protection  against 
transients, leading to high reliability in 
industrial  environments. Free wheel and stop 
mode available for  basic process operation.
www.andantex.com
POWER 
BFELOATCUKRSES
Power Block 2
Input voltage: 24 AC/DC
Output voltage: 0 to 10 DC (4 – 20 mA 
as an  option)
Zero compensation: +/-50% of 
FST  Emperature range: -10 to 
40°C  Accuracy: better than 
1%
Power Block 04
Ideal for higher remote control accuracy 
of the  smallest sizes of MEROBEL’s EMP 
Brakes and  Clutches and other brake 
technologies (i.e.
Hysteresys).
Max output current > 400 
m  AmpInput voltage > 24 V www.andantex.com
AC/DC
DGBLO
CK
OVERVIEW
Specifically designed for multi-spindles tension 
control  applications, DG-Block is the new 
benchmark in closed  loop digital controller for 
any industries using  equipment managing a 
large number of wires, cables,  fibers or even 
narrow webs.
Designed with the most advanced 
technologies,  DGblock offers a complete 
range of specialized  functions all in an 
incredibly compact controller.
One of the most noticeable feature is the bus 
connector  at the back of the enclosure which 
allows to distribute  the main data (set point, 
measurement, etc.), and the  process 
www.andantex.com
instruction from one master device to several  
slave devices, without any extra wiring.
DGBLO
CFEKATURES
Built-in precision amplifier for 1 or 2 
sensors  Compatible with any load cell 
technologies
P.I.D regulation algorithm
Combinations of open + closed loop 
function  for demanding applications
Emergency stop torque proportional to 
the set-  point
Soft start function with programmable 
ramp  Very easy set-up with the PC 
software  (Windows)
Multiple languages choice
Connection to the controller with 
MODBUS  TCP Ethernet port
Design specifically for multi spindle 
application
www.andantex.com
WEB TENSION 
C– ODNGTTR3O0L0L+ER
OVERVIEW
The newest Digital Controller from 
MEROBEL  combines, in a smart and low 
profile front face  enclosure, the most 
simple user’s interface with the  most 
advanced technical features.
Designed for both closed loop and open loop 
tension  control, the DGT300+ is the up-to-
date turnkey  solution for unwinding, 
rewinding and intermediate  tension control 
applications.
Allowing direct input of position sensors, US 
sensors, or  any kind of load cells technology 
signals, the DGT300+  design gives the benefit 
of fully digital calibration  procedure as simple 
as 1-2-3 (no switch, strap, or  resistawnwcwe.a)n.dantex.com
+Request a Quote.
WEB TENSION 
–C ODNGTTR3O0L0L+ER
FEATURES
Advanced Mod Bus capabilities
Automatic P.I.D. parameters variation 
function  Closed loop + Open loop 
modeInertia  compensation control
Smooth starting up with 
programmable slope  E-stop torque 
proportional to the set point  
Adjustable Taper function available
No-stop web turrets management 
function  Five complete built-in 
memories
Motors & Drives specific settings 
available  Advanced communication 
through TCP/IP  Protocols
Easy configuration through USB port
Easy commissioning with real time 
monitoring  and capture acquisitions.
www.andantex.com
Tare function for simplified 
maintenance  operation.
ABOUT 
ANDANTEX
Since our inception in 1980, Andantex USA objectives remain the same: Providing quality unique 
gearboxes and  solutions for use on industrial machinery.
All Sales, Engineering, Manufacturing and after market support are located at our headquarters in 
Wanamassa, New  Jersey.
Each member of our sales and engineering teams offer our customers the technical expertise 
required to meet their  application requirements, custom designs, support and solutions to 
enhance productivity.
As part of the global network of companies and products sold under the Redex-Andantex brand 
name, and in  conjunction with world class rack manufactures, Andantex USA is recognized as a 
leading provider of high-precision  motion control components and systems.
www.andantex.com
GET IN TOUCH WITH US
Mailing Address
1705 Valley Road
Ocean Township, New Jersey 
07712
Phone Number
(888) 743-1608
(732) 493-2812
EmailAddress
[email protected]
Fax
732.493.2949