WellMate WM-6, 20 Gallon, Fiberglass, Bladder Pressure Tank
                     WellMate WM-6, 20 Gallon, 
Fiberglass, Bladder Pressure Tank
https://www.aquascience.net/
WellMate Pressure Tanks
WellMate's tanks feature corrosion-proof composite construction that requires 
little or no maintenance, plus their light weight makes them easier and less costly 
to install. All materials meet stringent U.S. Requirements for water components 
and are NSF and/or FDA listed materials. WellMate continues its tradition of 
excellence by offering features and benefits steel tanks cannot match.
These rustproof WellMate pressure tanks are made with blow-molded, 
fiberglass wrapped, seamless construction. They won't rust, dent, or come apart at 
the seams because there are no seams, and a rugged base is included. Full five-
year limited warranty with a one-year replacement labor allowance.
This tank now features the quick connector that snaps securely into place and is 
retained by an H-clip.  See the photos below.
Note: All tanks are pre-pressurized at 38 PSI, and should always be set 
2 PSI below the cut-in of your pressure switch. It is recommended to 
check tank pressure before installation. Pressure switch settings 
should not exceed a 20 PSI differential between cut in and cut out.
Fiberglass Tanks
Product Features
nner liner: blow-molded polyethylene.
Outer shell: Filament wound with fiberglass tanks roving 
and epoxy resin.
Bladder: Heavy-gauge polyurethane (Separates air and 
water).
Bottom inlet/outlet assembly: high-impact PVC
Air connection: Standard tire valve.
Pre-charge: 40 PSI
Maximum operating pressure: 125 PSI
Maximum temperature: 120 degrees Fahrenheit
Connection: 1" MNPT (Male pipe thread)  Quick Connect - 
see photos below
Contact US
Aqua Science
301 Nooseneck Hill Rd
Wyoming, RI (Rhode Island) 02898
Store Hours (EST)
7:00am - 5:00pm (Monday – Friday)
8:00am - 12:00pm Saturday 
Toll Free: 800-767-8731
Local: 401-539-0500
Fax: 401-539-8778
Email: [email protected]
https://www.aquascience.net/