Top 12 Maintenance Tips For Marble Fountains
                     Top 12 Maintenance Tips For Marble Fountains
There are many wonderful human creations in the world: the Taj 
Mahal, the Golden Gate Bridge, the Pyramids — the list is endless. 
But if we talk about something water decorative, then you can 
always think about the water fountains for garden. Marble 
fountains, in particular, have a sense of timeless beauty about them 
that we all know and love. However, to keep that elegance flowing, 
they need proper maintenance.
Well, here are some tips that will help you preserve your fountain’s 
charm. So, without any further ado, let’s get started.
Tip #1: Start With A Gentle Routine
The very first thing to do is to create a routine for your fountain. 
Each week, wipe it down with a soft cloth & a mild, stone-safe 
soap.
Tip #2: Water Quality Checks
The next thing you need to do is check the fountain’s water pH 
regularly. Ideal levels are between the pH of 6.5 and 7.5.
Tip #3: Debris Removal
Don’t forget to skim away leaves, twigs, as well as other debris 
daily. This might be a simple step, but it can stop blockages and 
will keep the water looking fresh.
Tip #4: Deep Cleaner Interior
Another month, you should completely dry the fountain. And the 
scrub the basin with a soft brush & marble-safe cleaner. Rinse 
thoroughly before refiling to remove residue.
Tip #5: Inspect Pump & Plumbing
Every few days, make sure that the pump runs smoothly & tubing 
is clear. A quick visual check can do wonders for you — saving 
you from costly breakdowns later on.
Tip #6: Seal & Protect
Every six months, you should apply a breathable marble sealant. 
This protective coasting repels water & shields against oil & dirt. 
The result? It preserves the stone’s natural beauty.
Tip #7: Check for Cracks
You should also inspect your fountain for hairline cracks or chips. 
Luckily you can easily do small repairs with a suitable stone epoxy. 
The result? Preventing water infiltration & structural damage.
Tip #8: Winterisation
Now this is a term many of you must be reading for the first 
time. It actually means preparing the fountain before the first 
frost.
What to do? Drain the fountain & cover it securely. Why? 
Because
frozen water can crack marble! So a good cover & a dry basin 
are vital.
Tip #9: Algae Prevention
Let’s talk about the summer months a bit as well. During the 
hotter months, you need to add a marble-safe algaecide to 
deter green slime. This will keep your fountain sparkling while 
at the same time reducing the need for frequent scrubbing.
Tip #10: Polish & Buff
At the change of each season, you need to use a non-abrasive 
marble polish and a soft cloth. The purpose? To buff the surface. 
What it does is it restores & highlights the stone’s veining.
Tip #11: Monitor Water Levels Year-Round
Maintenance is not a one-time thing; it needs to be done all year 
round. And one thing you need to do is always keep the basin at 
the recommended level — to prevent the pump from running dry.
Tip #12: Annual Professional Inspection
Every year (at least once), you need to make sure the fountain 
is inspected by a professional. They will reseal, deep-clean and 
address any structural concerns you might have missed.
Final Thoughts
There you have it, folks — simple but useful 12 maintenance tips 
that you must follow. Just follow these and you will be good to go. 
Also, if you are looking for solutions like outdoor water 
fountains for hotels, reach out to Bhuvneshwari Moorti Art.
Source link:
https://www.bhuvneshwarimoortiart.com/blog/top- 
maintenance-tips-for-marble-fountains