Easy Steps to Paint Your Wrought Iron Gate
                     Easy Steps to Paint Your 
Wrought Iron Gate
Easy Steps to Paint Your 
Wrought Iron Gate
Step 1: For painting wrought iron gates, collect 
necessary tools and supplies like
• Paint scraper
• Wire brush
• Paintbrushes
• Sander and sandpaper
• Paint cleaning liquid
• Metal paint
• Dust mask
• One or more drop cloths
Easy Steps to Paint Your
 Wrought Iron Gate
Step 2: Understand how and when to 
Clean Wrought Iron
The weather plays a crucial part when it comes to painting a wrought iron 
gate. It must be dry and warm. When you start with the paint job, ensure that 
the humidity level is less than 80%. 
This prevents moisture from being trapped into the paint and shifting to the 
surface of metal gates. It will also form a strong bond between the bare metal 
and paint. 
Easy Steps to Paint Your 
Wrought Iron Gate
Step 3: Scrape Off and Sand 
You need to clean up the complete surface of your metal driveway gates to 
remove any moisture content. After that, use a paint scraper for removing old 
paint and exposed rust stains or spots. You need to use the wire brush for 
removing any rust and dust. If you don’t clean the surface, moisture will keep 
damaging the iron surface. 
The metal primer must stick firmly to the metal surface for the longest time 
possible. Then, sand the entire surface using a sander with medium-grit. If you 
find any crack or damage on the surface, you need to search for professional 
“iron gate repair near me” for fixing it before the paint job. 
Easy Steps to Paint Your 
Wrought Iron Gate
Step 4: Prime and Protect
You can even apply the primer separately. For this, you need to ensure how long 
it will take for a primer to dry. You need to apply it to the metal as quickly as 
possible. It will ensure a stronger bond between the paint and primer coat.  
Once the primer dries, you should sand the metal iron surface before repainting. 
Keep a drop cloth under the surface to be painted. If the paint is metal-based, dip 
the brush in the solvent before painting. But if it’s water-based paint, dip the 
paintbrush in water before painting. 
Easy Steps to Paint Your 
Wrought Iron Gate
Step 5: Paint
Instead of a thick coat, you need to apply the paint in small and thinner coats. 
Always apply a second coat after the first coat has dried. You also have to sand it 
gently before you apply the second coat. 
Address: 1291 Simpson Way Ste. C 
City: Escondido
State: CA
Postal code:  92029
Country: United States
Office Phone No. 800-576-1397
Email Id: [email protected]
Website - 
www.castlegaragedoors.com
Follow us on Social