Can I Put an Iron-On Patch Over Embroidery? Here’s the Right Way to Do It
                     Can I Put an Iron-On Patch Over Embroidery? Here’s the Right Way to Do It
Yes, you can put an iron-on patch over embroidery—but it requires some care and the
right technique to ensure a smooth, long-lasting result. Iron-on patches are a 
convenient way to personalize clothing and accessories, and when used correctly, they
can even enhance or repair embroidered designs. However, because embroidery 
creates a raised, textured surface, applying a patch over it isn’t quite as 
straightforward as pressing it onto a flat fabric.
Before applying, make sure the embroidered area is clean, dry, and free of loose 
threads. If the embroidery is thick or uneven, it helps to lightly trim or flatten any high
points to create a smoother base. Next, position your iron-on patch exactly where you 
want it. Place a Teflon sheet or a thin piece of cotton fabric on top to protect both the 
embroidery and the patch from direct heat.
Set your iron to medium-high heat (around 320°F or 160°C) and press down firmly 
for 15–20 seconds without sliding the iron. The adhesive on the patch will melt and 
begin to bond to the threads and fabric below. Once it cools, Can I put an iron-on a 
patch over embroidery  check the edges—if any lift, repeat the process for a few more
seconds.
Keep in mind that while the patch will adhere, embroidery threads don’t always 
provide the smoothest surface for bonding. For extra durability, especially on heavily 
embroidered or textured areas, you can add a few stitches around the patch’s edge 
after heat pressing.
In conclusion, you can iron a patch over embroidery successfully by using the right 
temperature, protection layer, and pressure. This technique is perfect for covering old 
logos, repairing damaged spots, or adding new designs to existing embroidery while 
keeping your garments looking stylish and unique.