Tips on Maintaining your Engine Mounts
                     Tips on 
Maintaining 
Your Engine 
Mounts
Whether your boat or vessel is new or maintained, determining
how to maintain inboard engine mounts is crucial. This is because
the engine mounts will be used to locate your engine for your
Tips on propeller shaft.
Gearbox flexible coupling and a properly designated mounting
Maintaining system allow the engine and hull to accept thrust from the prop or
shaft to move the craft across the water. To keep your engine in
Your efficient condition, engine mounts and couplings must be installed
Engine and maintained correctly.
How to Make Sure the Engine Mount is in Good Condition?
Mounts A marine engine mount must be designed to support the engine
while avoiding tilting, caster, and camber. Mounts should also
provide cushioning and stability. The material used should be
resistant to corrosion and withstand abrasion.
2
The mounting system should also be extended to ensure the
engine is attached to the vessel. The mount should also be bolted
Tips on and sprayed with corrosion inhibitors.
Make sure you're using the correct fasteners for your mount.
Maintaining Stainless steel bolts have a low tensile strength, so they won't hold
Your up well when installing the mount. If your mount has slots, youshould use thick washers, which are more deformation-resistant.
Engine If you have a boat, check your engine mounts regularly. You don't
want to have to replace them because you forgot to inspect them.
Mounts Keeping your mounts clean and free of liquids will prolong their
life. Also, use a corrosion inhibitor to prevent corrosion. Using an
anti-seize compound is also a bad idea.
3
It's also essential to check for any loose bolts or studs. You don't
want to use loose fasteners since they can break the mount. Also,
Tips on if you have a marine engine, avoid using lag bolts. If you use them,make sure you use grade 8 mild steel fasteners. These bolts can
Maintaining handle the load that your mount will likely experience.
If your engine mount is not holding up as well as it should, don't
Your despair. Several different types of engine mounts are available,
and each one has a different life span. Some have a lifespan of 10
Engine to 12 years, while others require replacement after only a few
Mounts years.
If you are looking for high-quality mount and coupling
replacement, visit Poly Flex. They provide the best Australian-
made marine engine parts that would match your needs. Contact
them now for enquiries and quick quotations.
4
Tips on 
Maintaining 
Your Engine 
Mounts