D-link DAP Dlink Extender extender
                     D-link DAP 
Dlink 
Extender 
extender
To get an internet connection, we need a router 
and modem. To get the entire coverage of your 
home with wifi, you need an extender. Dlink 
introduces DAP Dlink Extender N300 extender to 
extend the wireless range of the existing router. It 
is compatible with almost all the routers and you 
can place it anywhere at your home.  A built-in 
setup wizard is there in this extender, so you can 
set it up in just few seconds. Download the 
application on your mobile device and enter the 
username and password. You will get the same at 
the product label of your extender. Enter the 
details and follow the instructions till the setup 2
process finish.
•  Connect your computer to the DAP-Dlink 
Extender: take an  Ethernet cable. Connect its one 
end to the extender Ethernet port and another 
into your computer. Plug your extender into an 
electrical outlet. 
• Configure the IP address: we are here describing 
the configuration for Windows 7. At the taskbar, 
click on start and then go to control panel. Go to 
network and internet and then network 
connections. Change the adapter settings. You will 
see the LAN connection. Press right mouse button 
and select properties. Go to networking tab and 
click on TCP/IPv4. Enable the radio button 
representing use the following IP address. Enter 
the IP address (subnet mask) for your extender 3
and save the settings by clicking on ok button.
• Connect an adapter to the computer: 
connect an adapter to your computer and 
it’s another end into the power outlet. Turn 
on the adapter.
• Configure the IP address for your adapter: in 
the same way as you have configured the IP 
address for your PC, you can configure the IP 
address for your adapter. 
• In the taskbar, you will see an icon 
representing the network. Click on it and you 
will see a list of available networks. Select 
the wifi network of your Dlink DAP and enter 
the security key for the same. If you are 
setting up the extender then you will find 
the default password on the product label. 
Find the password and enter in the 
respective field while connecting to the 
extender.
• Connect to the user interface of the dlink 
dap Dlink Extender: launch an internet 
browser such as Internet Explorer and in the 
address bar of this browser; enter the 
default IP address of the extender. 
• If the device is properly set up then you will 
see a login page otherwise, you will get the 
setup wizard instructions. At the login page, 
enter the username and password. In this 
case, the default values are printed on the 
guidelines manual. Enter the details in the 
respective fields and click on login button. 
• Summary of all the details displayed on the 
basic home page. You can select language 
either Russian or English. 
Contact 
Information
www.Dlinkap-local.in