How Can I Fix a Damaged Garage Door Spring?
                     How Can I Fix a Damaged Garage Door
Spring?  
Encountering  a  broken  garage  door  spring  can  be  a  significant  hassle  for  homeowners,
leaving you scratching your head in annoyance when you're running late to work. Not only
does this inconvenience cease your garage door's operations, but it can be detrimental to your
safety  if  overlooked.  Fortunately,  we  have  you  covered  with  this  comprehensive  guide,
outlining a step-by-step guide to fixing a garage door spring. More significantly, when it
comes to garage door repairs, enlisting garage door services in Sacramento is prudent—for
peace of mind and a job well done.
Diving Deep into the Garage Door Springs
As you're all well-acquainted with, garage door springs are responsible for facilitating the
flawless operation of the garage door by counterbalancing the door's weight, relieving you of
the strain and hassle of opening and closing it  every time you need it.  Since these nifty
components are indispensable for the garage door's smooth functioning, understanding the
common types of springs is vital: Torsion springs and extension springs.
●       Torsion springs are mounted horizontally above the garage door opening. They use
torque to balance the door's weight and operate under high tension.
●       Extension springs are located on either side of the garage door tracks and extent as the
door closes, storing energy that helps lift the door when opened.
Both springs  are  under  constant  tension and can wear  out  or  break over  time,  requiring
replacement or repair.
Warning — Safety First!
Before exploring the steps to fix a garage door spring, consider that working with garage
door springs can be perilous due to the high tension they operate under. If you're a newbie,
consider engaging the best garage repair Sacramento professional to ensure your safety and
appropriate garage door repair.
Steps to Fix a Garage Door Spring
Execute the process with the following steps:
●  Gather the Necessary Tools and Supplies:
Ensure to have the below tools handy:
●       Replacement garage door spring(s)
●       C-clamps or locking pliers
●       Winding bars (for torsion springs)
●       A ladder
●       Safety goggles
●       Gloves
Verify that you get the right replacement spring for your garage door since the erroneous size
or type might cause further damage or safety hazards.
●  Disconnect the Garage Door Opener:
Foremostly, you must disconnect the garage door opener before commencing any work on it
to avoid sudden accidents. Simply pull the emergency release cord or unplug the opener from
its power source to do so.
●  Secure the Garage door:
Use C-clamps or locking pliers to secure the garage door in place, preventing it from moving
while you're working on the springs. When using torsion springs, fasten the door to the track
directly below the bottom roller.  Clamp the door to the track above the upper roller  for
extension springs.
●  Remove the Broken Spring:
Although removing a broken spring is relatively straightforward, it may vary depending on
the spring type. So, recognize first what spring you're working with:
For  torsion springs,  commence by inserting  a  winding bar  into the  winding cone at  the
spring's end. Hold the bar firmly and loosen the set screws on the cone. Carefully unwind the
spring  using  the  winding  bars,  releasing  tension  until  the  spring  is  fully  unwound.
Subsequently, remove the nuts and bolts securing the spring to the center bracket and slide
the spring off the torsion tube.
When working with extension springs, remove the safety cable running through the spring (if
present).  Next,  disconnect  the spring from the door's  track bracket,  pulley,  and eye bolt.
Vigilantly lower the door to release the tension on the spring, then remove the spring from its
mounting points.
●  Test and Balance the Garage Door:
After installing the new spring, test your garage door's operation by manually lifting and
lowering it. The door should open and close smoothly and remain balanced when partially
open. If the door seems unbalanced or hard to operate, you may need to adjust the spring
tension or consult a professional for assistance.
Source:
How to Fix Garage Door Spring?