Some of the Common Window Materials for Your Home
                     Some of the 
Common Window 
Materials for 
Your Home
Choosing the right window material for your room 
is a difficult decision to make, whether you’re 
replacing existing windows or starting from 
scratch. It’s critical to consider what each window 
type has to offer in terms of function, aesthetics, 
features, and cost savings. 
With improved technology, window 
manufacturers are continually enhancing the 
quality of their products. It’s essential to speak 
with a professional windows supply Norcross
 who has the experience and understanding to 
advise you on the different types of windows and 
which ones are best for you.
Factors To Watch Out:
Most windows have a rating sticker on them that 
indicates how well they perform in at least some 
of the following areas:
R-Value
The R-value of a window is a measurement of how 
well it prevents heat transmission or how well it 
keeps uncomfortable temperatures outside and 
pleasant ones inside. The R-value should be as 
high as possible.
U-Value
The U-value (or U-factor) is the inverse of the R-
value and quantifies the heat transfer propensity. 
As a result, a lower U-value is preferable.
Solar-Gain
When the sun is shining, solar gain (also known as 
solar heat gain coefficient, or SHGC) reveals how 
much a window will heat a room. Solar gain is 
beneficial when the weather is chilly, but it can 
significantly increase air-conditioning costs during 
the summer. The greater the number, the more 
heat is gained.
Wind Resistance
Air leakage, often known as wind resistance, is 
measured in cubic feet per minute (cfm). There 
should be two numbers: one for 70 degrees 
Fahrenheit and another for 0 degrees Fahrenheit. 
The better the seal, the smaller the numbers.
Types of Windows:
Vinyl Windows
This is usually the cheapest option and is ideal for 
a wide range of applications. The weatherstripping 
(which is often fuzzy) on lower-quality models is 
not sturdy, and some of the plastic elements may 
break, particularly when the window is tilted out 
for cleaning. 
Changes in temperature cause vinyl to contract 
and expand, reducing its capacity to seal. When 
exposed to extremely hot sunlight, it can also 
warp. Vinyl can be painted (using an alcohol-based 
primer first helps), but the paint will peel after a 
few years and will need to be redone.
Wood Windows
Wood is more expensive than vinyl, and it needs 
to be treated with paint or finish on a regular basis 
to prevent rotting and sun damage. Wood, on the 
other hand, has inherent insulating capabilities 
and is preferred by most people because of its 
appearance. 
Some are made of stain-quality wood, but 
windows with visible joints will not look good 
stained; instead, prepare to paint.
Clad Windows
Many manufacturers cover the external portions 
of wood windows with aluminum, vinyl, or 
fiberglass to make them more robust. Aluminum 
cladding can be painted if a primer is applied first.
Tinted vinyl and fiberglass can usually be painted 
without issue, although white vinyl may have 
difficulties adhering to paint. Windows with hard-
baked paint treatments are also available.
With improved technology, window 
manufacturers are continually enhancing the 
quality of their products. It’s essential to speak 
with a professional windows supply Norcross
 who has the experience and understanding to 
advise you on the different types of windows and 
which ones are best for you.
Double-Hung Windows
Because of its versatility and ease of use, the double-
hung window is the most prevalent. It contains a 
variety of specialized components. Water can run from 
a slightly slanted external sill. The inner stool (also 
known as the inside sill) is usually only large enough for 
a tiny plant; if it were any bigger, it would be bumped 
against by people. Stop moldings and separating stops 
must be perfectly matched to seal the window while 
allowing the sashes to freely travel up and down. 
Newer wood windows employ friction or springs to 
keep the sashes in place when they are raised, rather 
than the weight-and-pulley arrangement.
Wrapping Up:
Because of its versatility and ease of use, the double-hung window 
is the most prevalent. It contains a variety of specialized 
components. Water can run from a slightly slanted external sill. 
The inner stool (also known as the inside sill) is usually only large 
enough for a tiny plant; if it were any bigger, it would be bumped 
against by people. 
Stop moldings and separating stops must be perfectly matched to 
seal the window while allowing the sashes to freely travel up and 
down. Newer wood windows employ friction or springs to keep 
the sashes in place when they are raised, rather than the weight-
and-pulley arrangement depicted above. Contact professional 
windows supply, Norcross, for better choices.
Name: Georgia Window Fashions
Website: https
://georgiashutters.com/
Phone: 1-888-465-9467
Local Office: 770-447-0330
Fax: 770-217-4570
Email: [email protected]
Address: Georgia Window Fashions, 
2909 Langford Rd Suite A-200 
Norcross, GA 30071
Founded: 1996