Types of Pallet Rack Warehouse Accessories
                     TYPES OF PALLET RACK 
WAREHOUSE ACCESSORIES 
Pallets racks are found in warehouses of all sizes, whether they are giant warehouses 
stretching to whole town or a small warehouse of one room only.  You can use a small place for 
maximum storage with the help of pallet racks. Pallet rack warehouse accessories are often 
overlooked, but they improve functionality and performance. You can hold more products, 
resist damages and improve efficiencies within the warehouse using these accessories. This 
article entails nine types of pallet rack warehouse accessories. 
FRONT BUMPERS
• The most beneficial pallet rack warehouse accessory are triangular 
guards, made of steel, located at the base of the upright frame, and 
triangular guards above the base plate which offer more protection from 
impacts. These bumpers can be fixed permanently by welding, or they 
can be attached with the help of bolt or latches. Although, bolts and 
latches require extra labor and effort, but that makes them easy to 
replace. 
• The bumpers which are added after installation of racks do not perform as 
well; neither do they offer the same durability.
HEAVY DUTY RUB RAILS
• These pallet rack warehouse accessories are horizontal braces attached 
to the base of the upright, running from the front to rear vertical column. 
This allows the rail to act as a barrier against any possible impacts which 
forklift might cause, and also improves resistance by increasing the 
rigidity of upright.
DOUBLE COLUMNS
• You can increase the capacity of pallet racks by using additional vertical 
columns. These pallet rack warehouse accessories help in reducing shock 
damages because of the upright frame. Double columns are an ideal 
choice for spaces more prone to receive impacts, such as freezers, row 
ends and tunnels.
WIRE DECKS AND PALLET 
SUPPORTS
• Pallet supports provide extra support for the rack from falling, because they 
run from the front shelf beam to the rear, in a horizontal direction. Using two 
shelf beams as a shelf, without using any pallet supports, is a common 
mistake which we make while ordering Wire Decks. The two shelf beams are 
sufficient to support a pallet structure, but using pallet rack warehouse 
accessories such as wire decks or pallet supports add to its strength and 
sustainability. Wire decks offer a simple and reliable solution to racks, 
because they are easy to use, and are more efficient. Operators can put 
away faster by spending less time in positioning the load. 
• We prefer wire decks over pallet support because they create almost a solid 
surface, which allows storage space for smaller loads. Wire decks installation 
does not require as much labor as pallet support does because they can be 
installed easily. 
COLORS
• Pallet rack warehouse accessories are available in various colors which 
enhance performance and also add safety. Varying colors of shelf beam 
allow quick performance of operations. They can help differentiate racks 
according to load capacity, which allows the forklift to identify destination 
spots for loads easily. This increases the efficiency and performance of 
operations. Different colors alert the operators to be more cautious while 
they are busy working along tunnels or pedestrian walkways.
LABEL BEAMS
• Another great form of pallet rack warehouse accessories is shelf beams 
carrying labels. They indicate the pallet location which increases overall 
functioning and efficiency of the operations. Therefore, to keep operations 
quick, the labels must be maintained regularly, because quite often they 
can be damaged by forklifts interacting with the rack. Label beams save 
time, and improve performance in a warehouse. 
ERGO BEAMS
• Ergo beams are a great solution to pick things from the rear of a rack. It is 
very easy to pick items from the first level of racking, but once the front 
half or first level of the pallet is picked, it becomes a hassle to access 
items at the rear of the pallet. The operator might have to remove and 
rotate the pallet, to speed up the operations. With this efficient pallet rack 
warehouse accessory, the picker can walk between the two pallets on the 
lowest shelf. This allows complete access to all products, at the front and 
the rear.
PALLET RACK BACKSTOPS
• Quite often operators push back the pallets into the space between a 
double-row of rack, which is not desirable for an overhead fire 
suppression system. With the help of a pallet rack warehouse accessories, 
you can avoid this because too much displacement of items can cause 
products at the other end to be pushed off the shelf. With the help of a 
pallet backstops, you can take care of this. Backstops are offset which 
allow pallet to overhang by three-inches. One thing you must remember 
about backstops is that they can be installed conveniently during the rack 
assembly process; however, after installation is through, they are difficult 
to install. 
ROW END PROTECTORS
• Row end protectors are really helpful while loading dock end. The pallets 
can get damaged easily with forklifts operating at odd angles, or pallets 
at the edge of shelf getting hit by forklift. With the help of floor-mounted 
row end protectors, you can reduce the risk. 
CONCLUSION
• If you want top notch pallet rack warehouse accessories, Golden gate 
rack offers a big range of accessories which are not only helpful for 
adding protection, but also enhance efficiency and functionality. These 
accessories can be used to reduce damage and lower operational costs, 
while making a workplace safer. So, if you need 
warehouse accessories for pallet rack, talk to professionals to be 
sure that you are getting the best possible gadgets for your warehouse. 
THANK YOU