Let's Effectively Remove QuickBooks Error H202
                     QuickBooks error 
H202: The ultimate 
user guide to fix it!
The users can often encounter QuickBooks error H202 when they switch to multi-user mode. This 
error gets triggered when something blocks your multi-user connection to the server. Are you 
annoyed with this error in your QuickBooks? Don't worry. We are here to help you and guide you 
to fix this error. This article will provide effective solutions to fix this error in your QuickBooks. The 
users will also be unable to access their company files stored on another system due to this error. 
But before learning the solutions to fix this error, let us gather some more information about the 
signs and causes of this error. Knowing the reasons will help you avoid this error in QuickBooks. If 
you also stumbled upon this error code, we suggest you continue reading this blog until the end.
You can ring us on 1-855-856-0042 and speak to our experts to seek professional assistance in 
fixing the QuickBooks error H202. You can easily contact our technical team if you are looking 
for immediate solutions to fix this error.

Most common causes that can provoke the 
QuickBooks multi-user mode error H202
Below we have started some contributory causes that trigger this error on your desktop; read through 
them.
1. QuickBooks may trigger this error if it cannot access the host's IP address.
2. This QuickBooks error might occur if your DNS settings are incorrectly set up.
3. One further way the error can reach your system is through a faulty network (.nd) file.
4. The QuickBooks multi-user mode error H202 may appear on your screen if your QuickBooks 
database server manager has issues.
5. Additionally, incorrectly configured hosting settings may result in this QuickBooks error.
6. Double-check to make sure QuickBooksDBXX and QBCFMonitor are not running in the 
background.
How can we identify the QuickBooks error code 
H202?
Following are the signs and symptoms of the QuickBooks error H202.
1. The main indicator is that once users see error H202, they cannot switch to multi-user mode.
2. The QuickBooks error code H202 prevents you from accessing a company file stored on another 
computer.
3. After the error enters your system, the windows you're using will perform very slowly.
4. This error may be the reason why your QB abruptly stops functioning and freezes while operating 
it.
5. Once the error has entered your system, a pop-up will appear on your screen.
How to eliminate the error H202 in QuickBooks 
desktop with easy solutions?
We have listed several solutions to help users fix the error H202 in QuickBooks desktop. Follow these 
solutions till the end to easily rectify this error in your QuickBooks. You can work on QuickBooks and 
switch to multi-user mode once the error has been repaired.
Solution 1: Ping your server to check for network 
issues
Step 1: Switch on network discovery on your server pc
1. On the server and workstation computers, access the Windows start menu.
2. Access the network and sharing center by entering "network" into the search bar.
3. Change advanced sharing settings by tapping it.
4. Check the box next to "turn on network discovery" last.
Step 2: Get the server name from the server
5. Firstly ensure to launch the Windows start menu on the server system.
6. To open the run window, run into the search box.
7. In the run window, type "CMD."
8. Now hit the enter key.
9. Press enter again after typing "ipconfig/all" in the CMD window.
10. In the Windows IP configuration panel, look for the hostname. The server can be located on the right 
side.
11. To access the hostname quickly, copy and note it down.
Step 3: Check the server
1. On a workstation, launch the Windows start menu.
2. Type "run" into the search bar, then tap "open run."
3. Enter CMD in the run window after writing it there.
4. Once more, hit enter after typing "Ping (server name)." Do not insert the bracket as given here.
5. On your workstation where QuickBooks error H202 is present, repeat each step.
Solution 2: Check the QuickBooks services
1. On your server computer, launch QuickBooks.
2. Head to the file menu, then pick utilities.
3. Pick the choice to "host multi-user access" at last.
To ascertain the status of QuickBooksDBXX and QBCFMonitorservice on the server, continue with the 
steps below
1. At Start, launch your Windows start menu on the server pc.
2. Type "run" into the search box to launch the run.
3. Do not forget to type services.msc in the run box and tap Enter.
4. Double-click QuickBooksDBXX after browsing it.
5. Select automatic under Startup Type.
6. The service state should be "started or running." Assuming it is not listed, choose Start.
7. Tap on the recovery tab.
8. Select the option to restart the service from the drop-down menu for the first, second, and 
subsequent failures.
9. To save all the changes, proceed, tap on apply, and then click OK.
10. The steps above can be repeated for the QBCFMonitorService.
11. Then, launch QuickBooks on each workstation.
12. Head to the file menu and tap the option to switch to multi-user mode.
13. The error has been fixed if everything functions properly.
Solution 3: Utilize the tool hub along with the QuickBooks 
database server manager
Step 1: Install the tool hub on your pc
1. You should install Tool Hub on your computer.
2. Open the downloaded file.
3. Move ahead with the on-screen commands to finish installing the file.
4. Adhere to the rules and regulations.
Step 2: Launch and run the QB database server manager
5. After entering the QuickBooks tool hub, choose network issues.
6. Select the option QuickBooks database server manager.
7. Click Start Scan when you see your company file in the QB database server manager.
8. Explore the folder and run the scan if you can't find the company file.
9. When the scan is finished, tap close.
10. Open QuickBooks on every computer to check for the presence of the error H202.
11. Click the file to activate multi-user mode after that.
Step 3: Launch QuickBooks file doctor
1. Open the tool hub for QuickBooks.
2. Visit the page for company file issues.
3. The file doctor may take some time to open. Launch QuickBooks File Doctor by tapping it.
4. Pick the company file right away.
5. Once you click the option "check your file," tap "continue."
6. After entering your admin information, click the next button.
Follow the other solutions if you cannot rectify the error H202 in QuickBooks desktop after 
implementing the above solutions.
Solution 4: Alter the names of .nd files
7. Close QuickBooks, access the company file folder, and then look for and select any .nd files.
8. Rename the files and end the file names with .old.
9. Check if the error has been fixed by opening your company file.
Solution 5: Make a fresh folder for the QuickBooks company 
file
1. On the server computer, make a new folder.
2. Modify the new folder's permissions settings.
3. The .qbw file should be copied to the new folder.
4. Open the company file in multi-user mode.
Solution 6: Repair the QuickBooks desktop
5. Close QuickBooks on every device.
6. You can perform QuickBooks repair on all of the systems.
7. Select Programmes and Features from the Windows Control Panel.
8. Pick QuickBooks from the list of installed programs, then click the change and repair option.
9. To begin the repair procedure, follow the on-screen instructions.
10. Install the most recent version of QuickBooks after the repair is finished.
11. Check if the QuickBooks error H202 remains after accessing your company file.
Solution 7: Try to relocate your company data file
1. To save the company file, create a new folder.
2. Pick and copy the company data file from the current folder.
3. Go to the new company file folder.
4. Press and hold Ctrl and V keys to paste the file.
5. Now check to see if multi-user mode can be used to open the company file.
Solution 8: Modify the names of .tlg files
6. Shut down QuickBooks.
7. Launch the company file folder on the server computer.
8. To find the .tlg file, search for it.
9. Pick it and then tap the rename option from the menu that appears.
10. Press the enter key after adding .old to the end of the file name.
11. Try opening your company file while continuously pressing the Alt key.
12. Wait for the file to open.
13. By now, your QuickBooks desktop error H202 may have vanished.
Solution 9: Configure the firewall setting on the server
1. Look for configured firewall and internet setting for QB and try to set up Windows firewall 
exceptions.
2. Once you correct the firewall permissions, access QB on your workstations.
3. Head to file and then switch to multi-user mode now.
Wrapping up the blog!
You have any doubts related to the QuickBooks Error H202; you can contact us on 1-855-856-0042. Our 
QuickBooks support team is pro in dealing with these QuickBooks bugs and can help you answer all your 
queries. If you are not good in technical aspects and still need help fixing this error, contacting our 
support team will help you. With a great nag of dealing with these errors, they can help you resolve this 
error instantly.