6 Steps to Restore a Wood Door After Damage
                     
Introduction
Your wood door is one of the most important features of your home. It protects 
you from the elements and provides a first impression to guests. But over 
time, wooden doors can get damaged by weather, wear and tear, or even just 
everyday use.
If your wooden door is looking a little worse for wear, don’t worry!
You can easily restore it to its former glory with a little bit of time and effort. If 
you want to get professional assistance then ASL Locksmiths can help you with 
the best local door replacement and apartment door replacement!
In this blog post, we will walk you through the steps on how to restore a 
wooden door after damage. We will cover everything from repairing cracks and 
dents to sanding and refinishing.
So whether your door is just a little bit scuffed up or it’s in need of a complete 
makeover, we have you covered!
Here are the steps on how to restore a 
wood door after damage:
Step 1: Remove the door
Step 2: Remove all hardware
Step 3: Sand the door
Step 4: Remove sawdust and restain
Step 5: Apply exterior varnish
Step 6: Re-install hardware and re-hang 
the door
Step 1: Remove the door
The first step in restoring a wooden door is to remove it 
from its hinges. If the door is solid wood, it will be heavy, so 
you may need help with this step.
Open the door and stack some wood blocks beneath the 
bottom edge to help support it. Then, use a flathead 
screwdriver to tap the hinge pins upwards and out of the 
hinges. Once the door is removed, you can set up your 
workstation. Choose a location that is in the shade but well-
ventilated.
Step 2: Remove all hardware
The next step in restoring a wooden door is to remove all of 
the hardware. This includes the deadbolt, handle, mail slot, 
knocker, kick plate, and any lock covers. You can use a 
screwdriver or wrench to remove the screws or bolts that 
hold the hardware in place. Be careful not to damage the 
door or the hardware when removing them.
Once the hardware has been removed, you can assess the 
condition of the door. If the door is simply varnished, you 
can move on to step 3. However, if the door is painted with 
gloss, you will need to use a paint stripper to get the 
majority of it off .
Step 3: Sand the door
Once the hardware has been removed and the paint has been 
stripped, it’s time to sand the door. Start by sanding the flat 
surfaces with a power sander.
Use 60-grit sandpaper to remove the old finish and smooth out 
the surface. Be careful not to sand too much, as you don’t want 
to sand through the wood.
Once the flat surfaces have been sanded, go over the details by 
hand with 180-grit sandpaper. This will help to smooth out any 
rough edges and create a smooth, even finish.
Step 4: Remove sawdust and 
Afrter satndainign, the next step is to remove all of the sawdust. If 
it’s a warm day, you may also want to wipe the door down with 
a damp cloth to remove any remaining dust.
Once the sawdust has been removed, you can apply the stain. 
Use a paint brush or a rag to apply the stain evenly to the 
entire door. Be sure to saturate the wood, but don’t overapply 
the stain.
If you are painting the door with a gloss finish, you will need to 
apply a primer first. This will help the paint to adhere to the 
wood and prevent it from peeling.
Step 5: Apply exterior varnish
Once the stain has dried completely, it’s time to apply the exterior 
varnish. Exterior varnish is a clear finish that protects the wood 
from the elements, such as water, sun, and insects.
To apply the exterior varnish, use a clean, soft paintbrush. Apply 
the varnish in thin, even coats, working your way from the top of 
the door to the bottom. For the best results, apply at least 2 to 3 
coats of varnish.
Step 6: Re-install hardware and re-
hang the door
After the varnish has dried completely, it’s time to reinstall the door 
hardware. Use a screwdriver or wrench to attach the hardware to the door. 
Be sure to tighten the screws or bolts securely.
Once the hardware is reinstalled, you can’t hang the door in the frame. Use 
a level to make sure that the door is hanging straight. Once the door is 
level, secure it in place with the hinges.
If you don’t want to put in the extra effort to polish the brass fixtures, you 
can also replace them with new ones. This is a great way to give your 
doorway a fresh new look!
Conclusio
Restoring a wooden door aftner damage can be a daunting task, but it is definitely 
possible with the right tools and patience. By following the steps outlined in this 
blog post, you can bring your door back to its former glory and add years to its 
lifespan.
With a little care and attention, you can restore your wood door to its former 
glory and make it look new again!
At ASL Locksmiths, we offer the best insurance door replacement all over London. 
You can reach out to our best 24-hour Locksmith London team anytime at 020 
3070 3998 for any immediate door and locksmith-related needs.
Email  info Website
@locksmiths.londo  n htt
ps://locksmiths.london/
Location
Phone Unit 91, Hampstead House, 176 
020 3070 Finchley
3998 Road