20 Nano overview
                     WELCOME TO 
20 NANO 
Wax Additives / Processing Aids:-
Polymers are made of long chain molecules of varying sizes and distributions. These polymers tend 
to be :
•Relatively viscous above their melt temperature
•“Sticky” above their melt temperature
Lubricants serve to decrease the frictional forces found between :
•Polymer : Polymer
•Polymer : Metal
•Polymer : Filler
•Filler : Filler                              
Products :-Polyethylene Wax
Polyethylene waxes can be made in two main grades, emulsifiable and non emulsifiable waxes. The 
differences between both the grades are in relation to the molecular weight. The products are made in 
the molecular weight range of around 6000 and in the range of around 2000 to 4000
20 Microns Nano Minerals are making different grades of Polyethylene Wax :
• Fast Flow P
• Fast Flow S
• Flow AID
Properties:-
• Form : Polyethylene Wax is available as Pellets, Powders or Flakes
• Melting Point : 97-115 deg.C
• Specific Gravity : 0.922
• Other Details : Excellent Stability against Polishing, Scratch Resistance, Metal Mark Resistance, Scuff
     Resistance. Polyethylene
     Wax is resistant to Water and Chemical Materials.
 Markets:-
• Food Packaging
• Coatings : Mar Resistance, Anti blocking, Slip of form ability, Anti Settling and Anti Sagging, Abrasion
    Resistance, Metal Marking Resistance
• Printing Inks : Rub Resistance/Scratch Resistance
• Adhesives
MICRONISED WAX:-
A good definition of micronized wax is a wax powder with an average particle size of less than ten
 micrometers. Only hard wax can be ground this fine. Only low melt viscosity wax can be sprayed this 
fine.
Micronised wax products are successfully used today in many industries, such as paints, coatings, 
plastics, inks and adhesives.
Products & Markets
20 Microns Nano 
Minerals Grades Product Type Application D(50) Particle Additional Level
Name Size
Micron wax 234 PT Micronized PTFE Wax Coating, Ink, Leather 5 0.5 – 1.5 %
Micron wax 32 AF Micronized PE Wax Ink Solvent Base, Coil 
Coating
Powder Coating and 
Micron wax 1400 SF Micronized PE Wax Wood Coating 6 0.5 – 1%
Micron wax 105 O Micronized PE Wax Offset Ink, Coil & 5 0.5 – 2%
Wood Coating
Powder Coating & 
Micron wax 960 PL Micronized Amide Wax Leather Coating 5
Water Base Ink & 
Micron wax 30 AQ Water Base PE Wax Coatings 5 0.5 – 1 %
Wood Coating, Can 
Special modified PW 
Micron wax 996 CWP Wax Coating & Industrial 4 0.5 – 1 %
Plastic Coating
WAX EMULSION:-
  
Wax emulsion refers to the water based system with the particle size distribution below 1 µm, distinguished by the 
emulsion iconicity, it can be non ionic, anionic, and cationic. Wax emulsion is different from wax dispersion; it has 
no matting effect and is used for coating and inks which has high requirement on gloss.
Products:-
    Flowlube Emulsion
    FLOWLUBE EMULSION is advance surface protection and scratch resistance additives for coatings. Wax
    Emulsion is different from wax dispersion. It is non ionic emulsion of modified paraffin wax.
Properties:-
FLOWLUBE is a kind of Wax Emulsion, suitable to be used in coatings which have special requests
 on high transparency and gloss, and improve the hand feeling abrasion and scratch resistance.
CONTACT US :-
• ADDRESS :- 20 MICRONS NANO MINERALS 9 - 10, GIDC, Waghodia, Vadodara - 391760
Gujarat, India.
           02668 - 262711
• E-MAIL :- [email protected]
• VISIT :- https://20nano.com/products-markets/
THANK YOU