How to Create a Free-standing Patio
                     How to Build a Free-Standing Patio?
    
Transforming  your  outdoor  living  space  has  many benefits.  Homeowners  install  patio  covers  for
comfort, visual appeal, higher value, and privacy. Although a designer patio cover adds value to your
home, installing a quality patio cover matters. Consulting with an expert in patio covers in Lincoln is
the best way to have a quality patio cover. However, if you are keen on building a patio cover using
DIY methods, the following steps may help.
Many homeowners  prefer  building a  free-standing patio.  A free-standing patio  is  a  covered patio
installed without being attached to your house. It’s a free-standing patio standing on four posts. A free-
standing patio is available in different sizes, shapes and designs. Contacting professionals dealing in
patio covers in Roseville can help.
Benefits of a free-standing patio.
 Free choice of size
Since a free-standing patio does not require to be attached to the home, you can make as large a patio
as you want. Accommodating a significant number of people is easy with a free-standing patio. You
need an adequate number of support posts and beams.
 Easier to install
Since it does not need the support of your home roof, installing a free-standing patio is easy. It requires
four posts to support the cover. Attaching the patio cover to the home roof can be worrying if the
structure is not solid enough.
How To Install A Free-Standing Patio Cover?
• Select the Spot
Selecting the area for building the patio can help you determine the further steps easily. After selecting
the area, you can use markers, stakes or a rope to mark the area.
• Shove Out Holes and Control Moisture
Dig out the holes for posts using a hole digger. Dig a hole 24 inches deep and 9 inches wide. Add
gravel and crushed stone in the holes to control pests and moisture. Pests and moisture can eat wooden
posts.
• Install Posts
Install 4x4 posts in each hole and secure them with pressure-treated boards. Check whether each post
has the same level.
• Add Cement Around Posts
Pour some cement around the posts for firm and solid support. Let the cement dry for 24 hours.
• Cut the Beams
Shape the beams into the length of your choice. Creating a decorative beam can add visual appeal to
the overall patio cover.
• Beams and Main Post Assembling
Drill hole to adjust joist beams and the main post. Always ensure the level of beams is the same.
• Construct the Roof
Take the boards and shape them as required, and place them evenly. Secure the boards with galvanized
deck screws.
• Check its Strength
Your free-standing patio structure is ready. You can use lattice wood, translucent fibreglass, shades,
wood and shingles, metal panels, or other material to cover the patio.
Conclusion
Building a free-standing patio cover is not complex. However, it can be overwhelming for a beginner.
Consulting with an expert in patio cover installation in Sacramento is the best way to install a solid
patio.
--Article Source--
https://dailygram.com/blog/1210246/how-to-build-a-free-standing-patio/