Quick Guide to 5 Types of Waterproofing in Construction
                     Quick Guide to 5 Types of Waterproofing in Construction
INT RODUCATION
Waterproofing buildings is the technique of forming a barrier over surfaces of foundations, 
walls, roofs, and extra structural members of buildings to stop water penetrations through 
these surfaces. Building surfaces are made water-resistant and waterproof in summary.
Research has shown that waterproofing merely accounts for 1% of a building’s construction 
costs but it can be accountable for approximately ninety of the damage, when unobserved. 
However, for all purposes, it is also significant to remember that not all waterproofing 
chemicals are appropriate. Therefore, for your unique wants, you require to make sure that 
you obtain the right types of wet area waterproofing materials.
CEMENTITIOUS WATERPROOFING 
TO HELP YOU IN THE SELECTION PROCEDURE, BELOW ARE THE FIVE TYPES OF WATERPROOFING 
IN CONSTRUCTION:
Cementitious waterproofing products are measured as the 
easiest waterproofing materials to employ. They are simple 
to mix and be relevant as these are willingly available from 
suppliers of stonework products like MCT UAE. To give 
positive and negative side, cementitious waterproofing 
materials are breathable, flawless coatings used 
waterproofing protection on concrete and masonry 
surfaces. It is a two-component, cementitious coating 
comprising pre-weighed polymer customized powder & 
liquid components.
BITUMINOUS COATING WATERPROOFING 
As asphalt coating, the bituminous coating is also recognized. By its formulation and 
polymerization grade, it is a kind of coating used for waterproofing and elastic defensive 
coat
BITUMINOUS MEMBRANE WATERPROOFING METHOD – Due to their established 
performance, construction chemicals companies in UAE say that bituminous membrane 
waterproofing is a trendy technique used for low-sloped roofs. On the membrane and 
self-adhesive waterproofing membrane, bituminous waterproofing membranes have a 
torch.
POLYURETHANE MEMBRANE WATERPROOFING
For the flat roof area and uncovered to weathering, the polyurethane liquid membrane 
method of waterproofing is characteristically used. To moisture content present, this type 
of waterproofing material is extremely sensitive. Therefore, it is very important to be 
additional careful in evaluating the moisture content of the concrete slab, otherwise 
peeling or de-bonding of membranes may occur after some time before application.
LIQUID WATERPROOFING MEMBRANE METHOD – By spray, roller, or trowel, the liquid 
membrane is a thin coating that contains frequently a primer coat and two coats of 
topcoats which are applied. It offers more elasticity than the cementitious kinds of 
waterproofing.
Conclusion:
In the construction of waterproofing there is a quick guide 
of the main 5 types available such as cementitious, 
bituminous coating waterproofing, polyurethane 
membrane waterproofing bituminous membrane 
waterproofing method, liquid waterproofing membrane 
method. The above information will be helpful to give a 
detailed overview.
Sources Of 
https://organixbs.wordpress.com/2021/10/29/quick-guide
-to-5-types-of-waterproofing-in-construction/